Ge Refrigerator Error CI

⚡ Quick Answer: CI means ge refrigerator error CI indicates a compressor issue, often accompanied by unusual humming sounds or failure to cool. This is typically a DIY fix.

What Does Error CI Mean?

ge refrigerator error CI indicates a compressor issue, often accompanied by unusual humming sounds or failure to cool.

Common Causes

  • Compressor failure (60% likelihood)
  • Faulty start relay (30% likelihood)
  • Overheating (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the compressor for damage

    Remove the back panel of the refrigerator and visually inspect the compressor for any signs of physical damage or overheating.

    Look for burnt wires or melted components.

  2. Step 2: Test the start relay

    Disconnect the start relay from the compressor and test it with a multimeter for continuity. Replace if faulty.

    A faulty relay can prevent the compressor from starting.

  3. Step 3: Check compressor voltage

    Using a multimeter, measure the voltage at the compressor terminals. Ensure it matches the specifications.

    Low voltage can indicate wiring issues.

  4. Step 4: Clean the condenser coils

    Vacuum or brush the condenser coils to remove dust and debris that may cause overheating.

    Ensure good airflow to the compressor.

  5. Step 5: Replace the compressor if necessary

    If the compressor is damaged and not operational, it will need to be replaced by a professional.

    This is a complex task best handled by a technician.

How to Reset

The CI error cannot be reset until the underlying issue with the compressor is resolved.

Technical Specifications

wattage 200W
component Compressor
resistance 3-5 ohms
part_number WR07X10051
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the CI error myself?

Yes, but diagnosing compressor issues can be complex and may require professional help.

How long does it take to repair the CI error?

Repairing the CI error can take 2-3 hours depending on the issue.

What causes the CI error in GE refrigerators?

The CI error is primarily caused by compressor failure or a faulty start relay.

Should I attempt to replace the compressor myself?

It's recommended to call a professional for compressor replacement due to the complexity and risks involved.

When should I call a technician for the CI error?

If the compressor is damaged or if you're unsure about performing the repairs, contact a technician.

User Comments (0)

Share your experience or solution below.

Be the first to comment!