Ge Oven Error F9

⚡ Quick Answer: F9 means GE Oven error F9 indicates a malfunction in the oven temperature sensor, often resulting in erratic temperature readings... This is typically a DIY fix.

What Does Error F9 Mean?

GE Oven error F9 indicates a malfunction in the oven temperature sensor, often resulting in erratic temperature readings or failure to heat.

Common Causes

  • Oven temperature sensor (60% likelihood)
  • Wiring issues (30% likelihood)
  • Control board malfunction (10% likelihood)

Troubleshooting Steps

  1. Step 1: Test the oven temperature sensor

    Use a multimeter to check the resistance of the temperature sensor. It should read between 1,000 to 1,200 ohms at room temperature. If the reading is outside this range, the sensor is faulty.

    Ensure the oven is completely cool before testing.

  2. Step 2: Inspect the wiring connections

    Check the wiring harness connected to the temperature sensor for any visible damage or loose connections. Repair or replace as necessary.

    Look for frayed wires or corrosion.

  3. Step 3: Replace the temperature sensor

    If the sensor is faulty, remove the screws securing it in place, disconnect the wiring, and install the new sensor. Reconnect the wiring and secure it with screws.

    Ensure the new sensor is compatible with your oven model.

  4. Step 4: Reset the oven

    After replacing the sensor, reset the oven by holding the 'Bake' and 'Broil' buttons simultaneously for 3 seconds to clear the error code.

    This step may help in recalibrating the control board.

How to Reset

To reset the F9 error, hold the 'Bake' and 'Broil' buttons simultaneously for 3 seconds.

Technical Specifications

wattage
component Oven Temperature Sensor
resistance 1,000-1,200 ohms
part_number WB21X5301
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic electrical skills and tools, you can replace the temperature sensor.

How much does a new oven temperature sensor cost?

A replacement oven temperature sensor typically costs between $30 to $80, depending on the model.

What causes the F9 error in GE ovens?

The F9 error is usually caused by a faulty oven temperature sensor or issues with the wiring.

Should I call a professional for error F9?

If you're uncomfortable working with electrical components or if the issue persists after replacing the sensor, it's best to call a professional.

When should I consider replacing the control board?

If you've replaced the temperature sensor and wiring, yet the F9 error continues, the control board may need replacement.

User Comments (0)

Share your experience or solution below.

Be the first to comment!