GE Oven Error ERR
⚡ Quick Answer: The GE oven error code 'ERR' indicates an invalid or unsupported control input detected by the oven's internal diagnostics. This malfunction often res... ✅ DIY Fixable
What Does Error ERR Mean?
The GE oven error code 'ERR' indicates an invalid or unsupported control input detected by the oven's internal diagnostics. This malfunction often results in the oven failing to heat up or starting cooking after settings are entered. Users may notice the display shows 'ERR' after entering a cooking mode, and the error can sometimes be cleared by power cycling the oven. Ensure buttons are pressed correctly, as stuck buttons can also trigger this error.
Common Symptoms:
- Display shows "ERR" after entering a setting
- Oven does not start cooking after pressing controls when ERR is shown
- Code may clear after power cycle
Possible Causes
- Invalid or unsupported control input detected by the oven’s electronic control (medium)
How to Fix Error ERR
DIY Fix Clear entry and retry correct settings
- Press the "Clear/Off" button to clear the current state.
- Re-enter the intended cooking mode and temperature settings carefully.
- Ensure buttons are not stuck and are pressed one at a time.
DIY Fix Power cycle the oven to reset controls
- Turn off the oven, either using the power switch or circuit breaker.
- Wait about 60 seconds.
- Restore power and observe if "ERR" returns.
Technician Only Inspect control panel and electronic control board
- Verify that no buttons are mechanically stuck or damaged.
- Check the control panel’s connection to the main electronic control board.
- Use diagnostic tools to confirm that the control board registers valid inputs.
Parts needed: Control panel/touchpad, Electronic control board
- If "ERR" cannot be cleared by normal control use and power cycling
- If other codes appear after power cycle
- If physical control panel buttons are damaged or unresponsive
Next step
Choose the next step for ERR
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 3000W |
|---|---|
| component | Heating Element |
| resistance | 10-30 ohms |
| part_number | WB44T10010 |
| voltage_rating | 240V AC |
Common Questions
What does ERR error mean on GE oven?
The ERR error indicates an invalid control input, preventing the oven from starting cooking.
Can I fix GE oven ERR error myself?
Yes, you can clear the entry and retry settings or power cycle the oven to reset the controls.
How much does it cost to fix ERR error?
The estimated repair cost for ERR error ranges from $100 to $350, including parts and labor.
When should I call a technician for ERR?
Call a technician if the ERR code persists after trying to clear it or if other errors appear.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!