Ge Oven Error F350

⚡ Quick Answer: F350 means ge oven error F350 indicates a malfunction in the oven temperature sensor, which may cause erratic temperature readings ... This is typically a DIY fix.

What Does Error F350 Mean?

ge oven error F350 indicates a malfunction in the oven temperature sensor, which may cause erratic temperature readings and inconsistent cooking results.

Common Causes

  • Oven Temperature Sensor (70% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Temperature Sensor

    Remove the oven's back panel to access the temperature sensor. Check for any visible damage or loose connections.

    Ensure you have a clear workspace to avoid losing screws.

  2. Step 2: Test the Sensor Resistance

    Using a multimeter, measure the resistance of the temperature sensor. It should typically read between 1000-1100 ohms at room temperature.

    If the reading is outside this range, the sensor likely needs replacement.

  3. Step 3: Replace the Temperature Sensor

    If faulty, disconnect the old sensor and install a new one by reversing the removal process. Secure all connections tightly.

    Double-check that the new sensor is compatible with your oven model.

  4. Step 4: Reassemble the Oven

    Reattach the back panel and ensure all screws are tightened. Plug the oven back in and test for proper operation.

    Monitor the oven's temperature for consistency during the first use.

How to Reset

To reset the F350 error code, turn off the oven for 5 minutes and then turn it back on. If the error persists, further investigation is needed.

Technical Specifications

wattage N/A
component Oven Temperature Sensor
resistance 1000-1100 ohms
part_number WB21X5301
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow safety precautions, you can replace the temperature sensor.

How much does a new temperature sensor cost?

A new temperature sensor typically costs between $30 to $50, depending on the model.

What causes the F350 error code?

The F350 error code is usually caused by a malfunctioning oven temperature sensor or a wiring issue.

Should I call a technician if the error persists?

If the error continues after replacing the sensor, it may be best to consult a technician for further diagnosis.

When should I consider replacing my oven?

If you frequently encounter error codes like F350 and repairs are becoming costly, it may be time to consider a new oven.

User Comments (0)

Share your experience or solution below.

Be the first to comment!