Ge Oven Error F8

⚡ Quick Answer: F8 means GE Oven error F8 indicates a malfunctioning oven temperature sensor, often resulting in erratic temperature readings or ... This is typically a DIY fix.

What Does Error F8 Mean?

GE Oven error F8 indicates a malfunctioning oven temperature sensor, often resulting in erratic temperature readings or failure to heat.

Common Causes

  • Oven Temperature Sensor (60% likelihood)
  • Wiring Issues (30% likelihood)
  • Control Board Failure (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Oven Temperature Sensor

    Locate the temperature sensor inside the oven. Use a multimeter to check its resistance. It should typically read between 1000-1100 ohms at room temperature. If the reading is outside this range, the sensor is likely faulty.

    Ensure the oven is completely cool before touching the sensor.

  2. Step 2: Check Wiring Connections

    Examine the wiring connected to the temperature sensor for any signs of damage or loose connections. Secure any loose wires and replace any damaged wiring.

    Use a wire stripper to prepare any new wire connections.

  3. Step 3: Replace the Temperature Sensor

    If the sensor is faulty, remove it by unscrewing it from the oven wall. Install the new sensor by reversing the removal process and ensure all connections are secure.

    Make sure the new sensor is compatible with your GE oven model.

  4. Step 4: Test the Oven

    After replacing the sensor, turn on the oven and monitor the temperature. Use an oven thermometer to verify that the oven reaches the desired temperature accurately.

    This will confirm if the issue has been resolved.

How to Reset

To reset the F8 error, unplug the oven for 5 minutes, then plug it back in. This may clear the error if the issue was temporary.

Technical Specifications

wattage
component Oven Temperature Sensor
resistance 1000-1100 ohms
part_number WB21X5301
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow the steps carefully, you can replace it.

How much does a new temperature sensor cost?

A replacement temperature sensor typically costs between $20 to $50 depending on the model.

What causes the F8 error in my GE oven?

The F8 error is usually caused by a faulty temperature sensor or wiring issues affecting its functionality.

Should I call a technician if the error persists?

Yes, if you've replaced the sensor and the error continues, it may indicate a control board issue that requires professional assessment.

When should I consider replacing the entire oven?

If multiple components are failing and repairs are costly, it may be more economical to replace the oven.

User Comments (0)

Share your experience or solution below.

Be the first to comment!