Ge Oven Error F7

⚡ Quick Answer: F7 means GE Oven error F7 indicates a malfunctioning temperature sensor, often causing erratic temperature readings and inconsist... This is typically a DIY fix.

What Does Error F7 Mean?

GE Oven error F7 indicates a malfunctioning temperature sensor, often causing erratic temperature readings and inconsistent cooking results.

Common Causes

  • Temperature Sensor (70% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Temperature Sensor

    Locate the temperature sensor in the oven cavity and visually inspect it for any signs of damage or corrosion.

    Ensure the oven is completely cool before starting.

  2. Step 2: Test the Temperature Sensor

    Using a multimeter, check the resistance of the temperature sensor. It should typically read between 1000-1100 ohms at room temperature.

    If the reading is outside this range, the sensor is likely faulty.

  3. Step 3: Replace the Temperature Sensor

    If the sensor is faulty, disconnect it from the wiring harness and remove it from the oven. Install the new sensor and reconnect the wiring.

    Ensure all connections are secure to avoid future errors.

  4. Step 4: Test the Oven

    After replacing the sensor, turn on the oven and monitor the temperature readings to ensure they are accurate.

    If the error persists, further diagnostics may be needed.

How to Reset

To reset the F7 error, turn off the oven for 5 minutes and then turn it back on. If the error persists, further diagnostics are needed.

Technical Specifications

wattage
component Temperature Sensor
resistance 1000-1100 ohms
part_number WB21X5301
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, replacing the temperature sensor is a straightforward task that many homeowners can do with basic tools.

How much does a temperature sensor cost?

A replacement temperature sensor typically costs between $20 and $50, depending on the model.

What causes the F7 error in a GE oven?

The F7 error is primarily caused by a faulty temperature sensor that fails to provide accurate readings.

Should I call a technician if the F7 error persists?

If the error continues after replacing the sensor, it may indicate a deeper issue with the control board or wiring.

When should I replace the temperature sensor?

Replace the temperature sensor if you consistently receive the F7 error or if the oven is not cooking food evenly.

User Comments (0)

Share your experience or solution below.

Be the first to comment!