GE Oven Error F6
⚡ Quick Answer: The GE Oven F6 error code indicates a malfunction in the keypad or key panel, resulting in communication issues between the user interface and control... ✅ DIY Fixable
What Does Error F6 Mean?
The GE Oven F6 error code indicates a malfunction in the keypad or key panel, resulting in communication issues between the user interface and control board. This may lead to unresponsive buttons and erratic temperature readings. If the F6 error appears on the display, it suggests that the oven is not correctly receiving or processing input from the controls.
Common Symptoms:
- F6 displayed on oven control panel
- Oven may be unresponsive to input
- Buttons may appear stuck or unregistered
Possible Causes
- Keypad / Key panel malfunction (medium)
- Control board communication issue (medium)
How to Fix Error F6
DIY Fix Basic Reset
- Disconnect power to the oven by switching off the circuit breaker or unplugging for 5 minutes.
- Restore power and check if F6 reappears.
Technician Only Inspect and Address Control Interface
- Test the keypad/key panel for stuck or unresponsive buttons.
- Inspect wiring harness between keypad and control board for secure connections or damage.
- Replace the keypad/key panel if defective.
- If keypad test is normal, test control board communication and replace control board if confirmed faulty.
Parts needed: Keypad / Key panel assembly, Electronic control board, Wiring harness
- If error persists after reset and basic checks
- If you are uncomfortable accessing internal wiring or electronics
Next step
Choose the next step for F6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | None applicable |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | WB21X5301 |
| voltage_rating | 120V AC |
Common Questions
What does F6 error mean on GE Oven?
F6 indicates a malfunction in the keypad, causing communication issues with the control board.
Can I fix GE Oven F6 error myself?
Yes, try a basic reset by disconnecting power for 5 minutes; check if F6 reappears.
How much does it cost to fix F6 error?
Repair costs range from $100 to $500+, depending on parts and labor.
When should I call a technician for F6?
Call a technician if the error persists after a reset or if you're uncomfortable with internal repairs.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!