GE Oven Error F5
⚡ Quick Answer: The GE Oven F5 error code signifies a malfunction in the electronic control or relay circuit, often linked to a failing Electronic Oven Control (EOC) ... ✅ DIY Fixable
What Does Error F5 Mean?
The GE Oven F5 error code signifies a malfunction in the electronic control or relay circuit, often linked to a failing Electronic Oven Control (EOC) or control board. This error typically results in unresponsive buttons, erratic temperature readings, and the oven failing to heat properly. If the error persists after a power reset, it's indicative of a significant internal failure.
Common Symptoms:
- Oven displays F5 on control panel
- Oven may not heat or respond to commands
- Buttons or functions may be unresponsive
- Error persists after power cycle
Possible Causes
- Electronic Oven Control (EOC)/Control Board failure (high)
How to Fix Error F5
DIY Fix Power Reset Oven
- Turn off power to the oven at the circuit breaker
- Wait at least 60 seconds
- Restore power and observe if F5 reappears
Technician Only Inspect and Replace Control Board (EOC/ERC)
- Disconnect power and verify correct model’s control board part number
- Remove control board housing and disconnect wiring harnesses
- Install replacement control board and re-secure housing
- Restore power and test oven operation
Parts needed: Electronic Oven Control (EOC)/ERC board
Technician Only Check Relay Drive Circuit and Connections
- Power down oven
- Inspect wiring to relay outputs on control board
- Test continuity and relay function
- Replace failed relay or connection assembly if documented
Parts needed: Control board/relay components
- Error persists after power reset
- Oven does not function at all
- Signs of electrical issues (burnt smell, smoke)
Next step
Choose the next step for F5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | WB21X5301 |
| voltage_rating | 120V AC |
Common Questions
What does F5 error mean on GE Oven?
F5 indicates a control board failure, causing unresponsiveness and heating issues.
Can I fix GE Oven F5 error myself?
Yes, try a power reset by turning off the circuit breaker for 60 seconds.
How much does it cost to fix F5 error?
Repair costs range from $150 to $450+, depending on parts and labor.
When should I call a technician for F5?
Contact a technician if the error persists after a reset or if there are signs of electrical issues.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!