Ge Oven Error F4

⚡ Quick Answer: F4 means GE Oven error F4 indicates a malfunction in the temperature sensor, often resulting in erratic temperature readings and ... This is typically a DIY fix.

What Does Error F4 Mean?

GE Oven error F4 indicates a malfunction in the temperature sensor, often resulting in erratic temperature readings and inconsistent cooking performance.

Common Causes

  • Temperature Sensor (60% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Temperature Sensor Connection

    Open the oven door and locate the temperature sensor at the back wall. Check the wiring for any visible damage or loose connections.

    Ensure the connection is secure before testing the sensor.

  2. Step 2: Test the Temperature Sensor

    Using a multimeter, set it to the resistance setting. Disconnect the sensor and measure its resistance. It should read around 1,000 ohms at room temperature.

    If the reading is significantly off, the sensor likely needs replacement.

  3. Step 3: Replace the Temperature Sensor if Necessary

    If the sensor is faulty, remove it by unscrewing it from the back wall. Install the new sensor by reversing the removal process.

    Ensure to reconnect the wires securely.

  4. Step 4: Reset the Oven

    After replacing the sensor, reset the oven by holding the 'Bake' and 'Broil' buttons simultaneously for 3 seconds.

    This will clear the error code from the display.

How to Reset

To reset the F4 error, hold the 'Bake' and 'Broil' buttons simultaneously for 3 seconds.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1,000 ohms at room temperature
part_number WB21X5301
voltage_rating 120V AC

Frequently Asked Questions

Can I replace the temperature sensor myself?

Yes, if you have basic tools and follow the instructions carefully, you can replace it yourself.

How long does it take to fix the F4 error?

The repair typically takes about 30 to 45 minutes, depending on your experience level.

What causes the F4 error in GE ovens?

The F4 error is usually caused by a faulty temperature sensor that fails to provide accurate readings to the control board.

Should I call a professional for the F4 error?

If you're uncomfortable working with electrical components or if the issue persists after replacement, it's best to call a professional.

What happens if I ignore the F4 error?

Ignoring the F4 error can lead to inconsistent cooking results and may cause further damage to the oven's control system.

User Comments (0)

Share your experience or solution below.

Be the first to comment!