GE Oven Error F2
⚡ Quick Answer: The GE Oven F2 error code indicates an internal temperature exceeding safe limits, often due to a malfunctioning temperature sensor. This results in e... ✅ DIY Fixable
What Does Error F2 Mean?
The GE Oven F2 error code indicates an internal temperature exceeding safe limits, often due to a malfunctioning temperature sensor. This results in erratic cooking temperatures and may trigger an automatic shutdown to prevent overheating. Symptoms include the F2 code on the display, failure to heat, and unusual smells during operation, especially after self-cleaning cycles.
Common Symptoms:
- F2 (or F20) displayed on control panel
- Oven shuts down or refuses to heat
- Error appears during or after self‑cleaning
- Possible overheating smell or unusually high measured temperature
Possible Causes
- Overheating / temperature above safe threshold (high)
- Faulty or inaccurate temperature sensor (high)
- Ventilation blockage leading to heat buildup (medium)
- Control board malfunction (medium)
How to Fix Error F2
DIY Fix Power Reset and Vent Cleaning
- Disconnect oven power at breaker for several minutes
- Clean oven vents and ensure no obstructions
- Restore power and test oven operation
Technician Only Temperature Sensor Test/Replacement
- Disconnect power and access oven interior
- Remove and test temperature sensor resistance with multimeter
- Replace sensor if out of range or damaged
Parts needed: Temperature sensor
Technician Only Control Board Inspection/Replacement
- Ensure power is off and access control panel
- Inspect control board for visible damage (burn marks, melted components)
- Test or replace control board if faulty
Parts needed: Control board
- Error persists after sensor replacement and vent cleaning
- Control board shows physical damage
- User is uncomfortable performing electrical diagnostics
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Oven Temperature Sensor |
| resistance | 1,000-1,200 ohms |
| part_number | WB21X5301 |
| voltage_rating | 120V AC |
Common Questions
What does F2 error mean on GE Oven?
F2 indicates the oven temperature exceeds safe limits, often due to a faulty temperature sensor.
Can I fix GE Oven F2 error myself?
Yes, you can try a power reset and clean the oven vents to resolve the issue.
How much does it cost to fix F2 error?
Estimated repair costs range from $50 to $150 for parts and labor.
When should I call a technician for F2?
Call a technician if the error persists after trying reset and vent cleaning, or if there's physical damage to the control board.
Sources & References
- How to Fix GE Oven Error Code F2 - D3 Appliance (community)
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!