Ge Oven Error F1

⚡ Quick Answer: F1 means GE Oven error F1 indicates a malfunction in the control board, often accompanied by erratic display behavior or failure ... This is typically a DIY fix.

What Does Error F1 Mean?

GE Oven error F1 indicates a malfunction in the control board, often accompanied by erratic display behavior or failure to respond to settings.

Common Causes

  • Control Board (60% likelihood)
  • Faulty Wiring (30% likelihood)
  • Temperature Sensor (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Control Board

    Remove the oven's back panel to access the control board. Look for burnt components or visible damage.

    Document any visible issues for reference.

  2. Step 2: Check Wiring Connections

    Ensure all wiring connections to the control board are secure. Look for frayed wires or corrosion.

    Tighten any loose connections.

  3. Step 3: Test the Temperature Sensor

    Use a multimeter to check the resistance of the temperature sensor. It should typically read between 1000-1200 ohms at room temperature.

    Replace the sensor if readings are outside this range.

  4. Step 4: Replace the Control Board

    If the control board is damaged, order a replacement. Disconnect all wires and remove the screws securing the board before installation.

    Ensure the new board is compatible with your oven model.

  5. Step 5: Reassemble and Test

    Reattach the back panel and restore power to the oven. Test all functions to ensure the error code is cleared.

    Keep an eye on the display for any reoccurrence of the error.

How to Reset

To reset the F1 error, disconnect the oven from power for 5 minutes, then reconnect it. If the error persists, further diagnosis is needed.

Technical Specifications

wattage N/A
component Control Board
resistance 1000-1200 ohms
part_number WB27X10322
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the GE Oven F1 error myself?

Yes, if you have basic electrical knowledge and tools, you can troubleshoot and potentially fix the issue.

How much does it cost to replace the control board?

The cost of a control board can range from $100 to $300, depending on the model and supplier.

Why does my oven display the F1 error code?

The F1 error code typically indicates a failure in the control board, which may be caused by electrical surges or component failure.

Should I call a professional for the F1 error?

If you are not comfortable working with electrical components or if the issue persists after your attempts, it’s best to call a professional.

When should I consider replacing my oven due to the F1 error?

If the control board fails repeatedly or if other components are also malfunctioning, it may be more cost-effective to replace the oven.

User Comments (0)

Share your experience or solution below.

Be the first to comment!