Ge Dryer Error E60

⚡ Quick Answer: The GE dryer E60 error indicates a door error, where the dryer thinks the door is open or does not register the door circuit correctly. This may preve... ✅ DIY Fixable

What Does Error E60 Mean?

The GE dryer E60 error indicates a door error, where the dryer thinks the door is open or does not register the door circuit correctly. This may prevent the dryer from starting or heating. Common causes include the door not being fully latched, a faulty door switch or sensor, loose wiring, or control board malfunctions.

Common Symptoms:

  • Displayed when starting a cycle if the dryer detects the door open
  • Dryer may not start or heat
  • Door latch may not 'click' or be sensed

Possible Causes

  • Door open or not fully latched (high)
  • Faulty door switch or sensor (high)
  • Loose or faulty wiring between door switch and control board (medium)
  • Control board falsely detecting door error (medium)

How to Fix Error E60

DIY Fix Check and Reseat Door

  1. Ensure dryer door is fully closed and latched (listen for click)
  2. Open and close the door firmly to reseat latch
  3. Clear error by cycling power (unplug for ~1 minute then reconnect)

Technician Only Test and Replace Door Switch

  1. Disconnect power to dryer
  2. Access and test door switch with multimeter for continuity when closed
  3. Inspect wiring harness between door switch and control board
  4. Replace door switch if defective

Parts needed: door switch, wiring harness

Technician Only Inspect Control Board if Door Switch Replacement Doesn’t Clear Error

  1. Verify correct wiring and connections at control board
  2. Run diagnostics/service mode per model instructions
  3. Replace control board if it continues to falsely report E60

Parts needed: control board

🛑 When to Call a Pro:
  • If testing shows door switch and wiring are good but error persists
  • If control board faults are suspected
  • If you are uncomfortable accessing internal components

Technical Specifications

wattage 5400W
component Heating Element
resistance 10-30 ohms
part_number WE11X10003
voltage_rating 240V AC

Common Questions

What does E60 error mean on GE dryer?

E60 indicates a door error, where the dryer thinks the door is open, preventing operation.

Can I fix GE dryer E60 error myself?

Yes, check the door latch, reseat it, and cycle power to clear the error.

How much does it cost to fix E60 error?

Repair costs range from $30 to $90 for parts, depending on the issue.

When should I call a technician for E60?

Call a technician if the error persists after checking the door switch and wiring.

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!