Ge Dryer Error E04

⚡ Quick Answer: The GE dryer E04 error code indicates a malfunction in the moisture sensor, specifically an issue with the inlet thermistor. This may cause the dryer ... ⚠️ Difficulty Varies

What Does Error E04 Mean?

The GE dryer E04 error code indicates a malfunction in the moisture sensor, specifically an issue with the inlet thermistor. This may cause the dryer to stop mid-cycle or fail to heat properly, affecting your laundry process. If the code persists after a power reset, it usually points to an open or failed thermistor, loose wiring connections, or a potential control board malfunction.

Common Symptoms:

  • Dryer displays E04 on the control panel
  • Dryer may fail to heat or may not complete cycle
  • Code persists after a power reset

Possible Causes

  • Open or failed inlet thermistor (temperature sensor) (medium)
  • Loose wire or poor connection to thermistor or control board (medium)
  • Control board malfunction affecting thermistor circuit (low)

How to Fix Error E04

DIY Fix Perform simple power reset

  1. Unplug the dryer from power.
  2. Wait at least 1 minute.
  3. Plug the dryer back in and restart.

DIY Fix Check for loose connections (visual)

  1. Turn off and unplug the dryer.
  2. Access the back panel to locate thermistor wiring if comfortable.
  3. Visually inspect for loose or disconnected wires at the thermistor and control board.
  4. Reconnect any loose connectors.

Technician Only Test and replace inlet thermistor

  1. Disconnect power to dryer.
  2. Access and remove the inlet thermistor.
  3. Test thermistor resistance with a multimeter at room temperature.
  4. Replace thermistor if out of specification.

Parts needed: Replacement inlet thermistor

Technician Only Inspect and repair control board as needed

  1. Disconnect power to dryer.
  2. Perform diagnostics on control board thermistor circuit.
  3. Repair or replace control board if fault is confirmed.
  4. Reassemble and test dryer operation.

Parts needed: Dryer control board

🛑 When to Call a Pro:
  • If the error persists after basic checks and power reset
  • If internal disassembly is required beyond visual wiring inspection
  • If replacement parts or board diagnostics are needed

Technical Specifications

wattage 500W
component Moisture Sensor
resistance 10-30 ohms
part_number WE04X25354
voltage_rating 120V AC

Common Questions

What does E04 error mean on GE dryer?

E04 indicates a moisture sensor malfunction, often due to a faulty inlet thermistor.

Can I fix GE dryer E04 error myself?

Yes, you can perform a power reset and check for loose connections.

How much does it cost to fix E04 error?

Repair costs for the inlet thermistor range from ¥3,000 to ¥12,000.

When should I call a technician for E04?

Call a technician if the error persists after basic checks or if internal repairs are needed.

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!