Ge Dryer Error E05

⚡ Quick Answer: The GE dryer E05 error indicates a thermal fuse failure, specifically relating to the outlet thermistor (temperature sensor) circuit. This fault typic... ⚠️ Difficulty Varies

What Does Error E05 Mean?

The GE dryer E05 error indicates a thermal fuse failure, specifically relating to the outlet thermistor (temperature sensor) circuit. This fault typically results in the dryer not heating and displaying the E05 code on the control panel. Common causes include an open or faulty thermistor, damaged wiring, or a control board issue affecting the thermistor circuit.

Common Symptoms:

  • Dryer displays E05 on the control panel
  • Dryer may stop heating or fail to operate normally due to temperature sensor fault detection

Possible Causes

  • Open or faulty outlet thermistor (temperature sensor) (medium)
  • Loose or damaged wiring/connection to thermistor (medium)
  • Control board fault affecting thermistor circuit (low)

How to Fix Error E05

DIY Fix Basic user checks and reset

  1. Power off and unplug the dryer for at least 1–3 minutes to reset diagnostics
  2. Ensure lint filter and vent are clean (improves airflow, though not directly linked to E05)
  3. Power the dryer back on and retest to see if E05 clears

Technician Only Diagnose and replace outlet thermistor

  1. Unplug the dryer and access interior (refer to model service manual)
  2. Locate outlet thermistor near blower housing
  3. Test thermistor resistance with a multimeter — verify it changes with temperature
  4. Inspect and secure wiring/connectors between thermistor and control board
  5. Replace thermistor if open or out of spec and clear error code

Parts needed: Outlet thermistor, Wiring harness/connectors

🛑 When to Call a Pro:
  • If multimeter testing or internal diagnostics is required and you are not qualified to work with electrical appliances
  • If control board replacement appears necessary after component testing

Technical Specifications

wattage 5000W
component Thermal Fuse
resistance 0 ohms (continuity)
part_number WE4M139
voltage_rating 240V AC

Common Questions

What does E05 error mean on GE dryer?

E05 indicates a thermal fuse failure, linked to the outlet thermistor, causing the dryer to not heat.

Can I fix GE dryer E05 error myself?

Yes, you can try resetting the dryer by unplugging it and checking the lint filter; however, replacing the thermistor will require a technician.

How much does it cost to fix E05 error?

Repair costs range from $30 to $120 for parts, plus labor if a technician is needed.

When should I call a technician for E05?

Call a technician if you need multimeter testing or if the control board may need replacement.

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!