GE Dryer Error E01
⚡ Quick Answer: The GE dryer error E01 indicates a malfunction in the control board, commonly resulting in the dryer failing to start or respond to settings. This err... ✅ DIY Fixable
What Does Error E01 Mean?
The GE dryer error E01 indicates a malfunction in the control board, commonly resulting in the dryer failing to start or respond to settings. This error may stem from an EEPROM/control diagnostics memory fault or a faulty thermistor/temperature sensor. If the E01 error appears, the dryer may lock out until the issue is resolved.
Common Symptoms:
- Dryer displays E01 and will not start or operate normally
- Error appears at start or shortly after powering on
- Unit may be locked out until the fault is cleared or repaired
Possible Causes
- EEPROM / control diagnostics memory fault (control board detected internal fault) (medium)
- Faulty thermistor / temperature sensor (community reports) (medium)
How to Fix Error E01
DIY Fix Basic Reset and Power Check
- Unplug the dryer from the power outlet or switch off the circuit breaker for 5–10 minutes.
- Ensure the dryer is on a proper dedicated circuit and not using an extension cord.
- Restore power and attempt to start a basic cycle to see if the error clears.
Technician Only Control Board and Sensor Diagnosis
- Use a multimeter to test the thermistor(s) for proper resistance at room temperature.
- Inspect wiring harnesses to the sensor(s) and control board for loose connections or damage.
- If thermistor readings are out of specification, replace the thermistor.
- If sensors test normal, inspect the main control board for EEPROM memory integrity issues and replace if faulty.
Parts needed: Thermistor sensor(s), Main control board / EEPROM module
- If the error persists after a proper reset and basic diagnostic checks
- If diagnostic readings are ambiguous or the control board appears damaged
- If you are not comfortable working with internal electrical components
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Control Board |
| resistance | N/A |
| part_number | WE1M1067 |
| voltage_rating | 120V AC |
Common Questions
What does E01 error mean on GE dryer?
E01 means a malfunction in the control board, preventing operation.
Can I fix GE dryer E01 error myself?
Yes, try a basic reset by unplugging or switching off the circuit for 5–10 minutes.
How much does it cost to fix E01 error?
Repair costs range from $60 to $350, depending on parts and labor.
When should I call a technician for E01?
Call a technician if the error persists after resetting or if the control board is damaged.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!