Frigidaire Washing Machine Error E5A
⚡ Quick Answer: The Frigidaire washing machine E5A error indicates a malfunction in the motor control board, often due to overheating or failure. This issue typically... ✅ DIY Fixable
What Does Error E5A Mean?
The Frigidaire washing machine E5A error indicates a malfunction in the motor control board, often due to overheating or failure. This issue typically causes the washer to stop operation and display the error code, preventing normal wash cycles. A basic power reset may temporarily clear the error, but persistent problems may require further inspection and repair.
Common Symptoms:
- Washer stops operation and displays E5A on the control panel
- Possible inability to run wash cycles normally
- Error persists until power reset or component intervention
Possible Causes
- Motor control board overheating or failure (medium)
- Motor control board malfunction (medium)
How to Fix Error E5A
DIY Fix Basic restart and visual inspection
- Unplug the washer from power for 1–5 minutes and then reconnect to clear transient errors.
- Check for any obvious signs of overheating around the back panel (e.g., burnt smell or discoloration).
Technician Only Inspect and replace the motor control board
- Disconnect power and remove the back panel of the washer to access the internal motor control board.
- Visually inspect the board and heat sink for discoloration, burnt components, or signs of overheating.
- Test the board and related motor circuitry for faults using appropriate diagnostic tools.
- Replace the defective motor control board with a compatible part per manufacturer model specifications.
- Reassemble and test the washer to confirm that E5A no longer appears.
Parts needed: Motor control board (specific to washer model), Associated wiring harnesses
- If unplugging and resetting does not clear the error
- If there are signs of burned components or smells
- If you are not comfortable accessing internal components safely
Next step
Choose the next step for E5A
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E5A error mean on frigidaire washing machine?
E5A indicates a motor control board malfunction, causing the washer to stop and display the error.
Can I fix frigidaire washing machine E5A error myself?
Yes, you can try unplugging the washer for 1–5 minutes to reset it, and visually inspect for overheating.
How much does it cost to fix E5A error?
Repair costs vary but typically range from moderate to high for motor control board parts, plus labor.
When should I call a technician for E5A?
Call a technician if the error persists after a reset, if you smell burnt components, or if you're unsure about safely accessing internal parts.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!