Frigidaire Washing Machine Error EB2

⚡ Quick Answer: The Frigidaire washing machine error EB2 signifies a malfunction in the door lock mechanism, which can cause the washer to stop shortly after starting... ✅ DIY Fixable

What Does Error EB2 Mean?

The Frigidaire washing machine error EB2 signifies a malfunction in the door lock mechanism, which can cause the washer to stop shortly after starting, display beeping alerts, and shut down mid-cycle. This error often results from high incoming line voltage exceeding 130 VAC or a defective electronic control board misinterpreting the voltage. Addressing these issues promptly can restore your washer's functionality.

Common Symptoms:

  • Washer stops shortly after starting and displays EB2
  • Beeping and cycle shutdown
  • Random interruptions mid‑cycle with error displayed

Possible Causes

  • High incoming line voltage (medium)
  • Defective electronic control board misinterpreting incoming voltage (medium)

How to Fix Error EB2

DIY Fix Check mains voltage to washer

  1. Unplug the washer or turn off circuit breaker.
  2. Use a multimeter to measure the outlet voltage where the washer is plugged in.
  3. Ensure voltage is within normal household range.
  4. If voltage is above ~130 VAC, do not operate the washer until resolved.

DIY Fix Reduce power fluctuations

  1. Plug washer into a surge protector rated for large appliances.
  2. Avoid using shared or overloaded circuits.
  3. Test the washer again to see if error repeats under stable voltage.

Technician Only Inspect/replace electronic control board

  1. Confirm line voltage to washer is within normal range under load.
  2. Disconnect power and access control board per service manual.
  3. Test voltage sensing circuitry and replace board if sensors or board components are faulty.
  4. Reassemble and test washer operation.

Parts needed: electronic control board

🛑 When to Call a Pro:
  • If measured incoming voltage is dangerously high (>130 VAC) indicating household wiring issues
  • If error persists after verifying normal voltage and basic checks

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number 137006000
voltage_rating 120V AC

Common Questions

What does EB2 error mean on frigidaire washing machine?

EB2 error indicates a door lock malfunction, causing the washer to stop and display beeping alerts.

Can I fix frigidaire washing machine EB2 error myself?

Yes, check the mains voltage and use a surge protector to reduce power fluctuations.

How much does it cost to fix EB2 error?

Estimated repair cost for EB2 error is between $150 and $400, including parts and labor.

When should I call a technician for EB2?

Call a technician if voltage exceeds 130 VAC or if the error persists after checking voltage.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!