Frigidaire Washing Machine Error EF2
⚡ Quick Answer: The Frigidaire Washing Machine error EF2 indicates that excessive suds have been detected during the wash cycle, often leading to a loud humming sound... ✅ DIY Fixable
What Does Error EF2 Mean?
The Frigidaire Washing Machine error EF2 indicates that excessive suds have been detected during the wash cycle, often leading to a loud humming sound and the failure of the machine to properly drain water. This issue can be caused by using too much detergent or the wrong type of detergent, as well as residual suds from a previous wash cycle.
Common Symptoms:
- Washer pauses mid‑cycle
- Foam / soap suds remains visible
- Error code EF2 displayed on control panel
Possible Causes
- Excessive detergent or unsuitable detergent (high)
- Residual suds from improper rinsing in prior cycle (medium)
How to Fix Error EF2
DIY Fix Clear Excess Suds and Restart Cycle
- Pause or cancel current wash cycle.
- Leave door/lid open briefly to allow suds to dissipate.
- Wipe visible suds from drum and door gasket.
- Restart with minimal or no detergent.
- If available, run a rinse/spin or tub clean cycle to flush out remaining soap residue.
Technician Only Inspect Detergent Usage and Rinse Efficiency
- Verify correct HE detergent is being used and measure appropriate amount.
- Check detergent dispenser and internal passages for buildup or blockages.
- Run diagnostic to confirm no sensor faults related to suds detection.
- If EF2 persists without excessive suds present, test suds sensor and related control board functions.
Parts needed: Detergent dispenser assembly, Suds detection sensor (if applicable), Control board (diagnostic only if sensor fault)
- If error persists despite proper detergent use and rinsing
- If there are signs of control or sensor malfunction
Next step
Choose the next step for EF2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Detergent Dispenser
Releases detergent, bleach, or rinse aid at the correct moment in the cycle.
- Typical part-only price
- $30 - $70
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | 137108000 |
| voltage_rating | 120V AC |
Common Questions
What does EF2 error mean on Frigidaire Washing Machine?
EF2 error indicates excessive suds detected, causing the washer to pause mid-cycle.
Can I fix Frigidaire Washing Machine EF2 error myself?
Yes, clear excess suds, restart the cycle, and wipe visible suds from the drum.
How much does it cost to fix EF2 error?
The estimated cost for diagnosing and fixing the EF2 error ranges from $50 to $200.
When should I call a technician for EF2?
Call a technician if the error persists despite proper detergent use or if there are signs of a malfunction.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!