Frigidaire Washing Machine Error E58
⚡ Quick Answer: The Frigidaire washing machine error E58 indicates a malfunction in the motor drive unit, which may be caused by a high current draw or motor fault de... ✅ DIY Fixable
What Does Error E58 Mean?
The Frigidaire washing machine error E58 indicates a malfunction in the motor drive unit, which may be caused by a high current draw or motor fault detected by the internal diagnostics. Symptoms include the washer stopping mid-cycle, failure of the motor to start, and absence of spin or agitation. Unusual noises may accompany the error, pointing to potential issues with the motor control board or damaged wiring.
Common Symptoms:
- Washer stops and displays E58
- Motor fails to start or run properly
- No spin or agitation detected
Possible Causes
- High current draw detected by motor control circuit (medium)
- Faulty motor control board / speed control board (medium)
- Damaged wire harness between control board and motor (medium)
How to Fix Error E58
DIY Fix Basic checks and reset
- Turn off and unplug the washer for 5 minutes to reset internal electronics.
- Check that the washer is on a dedicated, correctly rated power circuit.
- Ensure nothing is blocking the drum from turning manually.
Technician Only Inspect and test motor system
- Verify motor current draw with appropriate diagnostic tools while attempting to run the washer.
- Inspect wire harnesses and connectors between the motor and main control board for wear, breaks, or poor contact.
- Test and replace the motor control board or speed control module if defective.
Parts needed: Motor control board, Drive motor, Wire harness/connectors
- If you are uncomfortable working with electrical components.
- If after basic reset and power checks the error persists.
- If diagnostic tools show abnormal current draw or inconsistent motor behavior.
Next step
Choose the next step for E58
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drive Motor
Drives the drum, agitator, or pump to rotate during cycles.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Motor Drive Unit |
| resistance | 5-15 ohms |
| part_number | 134511600 |
| voltage_rating | 120V AC |
Common Questions
What does E58 error mean on Frigidaire washing machine?
E58 indicates a motor drive unit malfunction, often linked to high current draw or motor faults.
Can I fix Frigidaire washing machine E58 error myself?
Yes, try resetting the washer, checking the power supply, and ensuring the drum can turn freely.
How much does it cost to fix E58 error?
$150–$450+, depending on parts and labor, varies by region and model.
When should I call a technician for E58?
Call a technician if the error persists after basic checks or if you're uncomfortable with electrical components.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!