Frigidaire Washing Machine Error E57
⚡ Quick Answer: The Frigidaire washing machine error E57 indicates a motor control issue, typically related to high current draw in the motor circuit. This error ofte... ✅ DIY Fixable
What Does Error E57 Mean?
The Frigidaire washing machine error E57 indicates a motor control issue, typically related to high current draw in the motor circuit. This error often causes the washer to stop mid-cycle, fail to spin during agitate, or produce unusual sounds. Possible causes include a faulty drive motor, issues with the motor control board, or mechanical obstructions affecting the spin bearing.
Common Symptoms:
- Washer stops mid‑cycle with E57 displayed
- Motor does not spin, especially during spin/agitate
- High current draw condition detected in motor circuit
Possible Causes
- High current/overload condition on motor inverter (medium)
- Faulty drive motor or motor winding issue (medium)
- Speed control / motor control board failure (medium)
- Spin bearing / tub obstruction causing high mechanical load (medium)
How to Fix Error E57
DIY Fix Preliminary checks
- Unplug the washer and wait 5 minutes before any inspection.
- Check that the washer is not overloaded with laundry and redistribute clothes evenly.
- Ensure the washer is on a level surface to avoid mechanical binding.
Technician Only Diagnose and resolve motor/inverter issue
- Disconnect power to the washer.
- Remove the drive belt and test if the motor pulley spins freely by hand.
- Measure resistance of the motor windings and tachometer (if applicable).
- Inspect and test the motor control board for faults.
- Replace the motor if it is seized or has abnormal resistance.
- Replace the motor control/speed control board if motor tests are normal but E57 persists.
- Inspect spin bearings/outer tub for binding and replace if necessary.
Parts needed: Drive motor, Motor control board / speed control board, Spin bearings / outer tub assembly
- If the error persists after basic user‑level checks
- If internal electrical/mechanical diagnosis is needed
- If you are not comfortable working with electrical components
Next step
Choose the next step for E57
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Motor
Drives the drum, agitator, or pump to rotate during cycles.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Washer Tub Assembly
Forms the model-specific inner basket and outer water-containing tub assembly.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 500W |
|---|---|
| component | Motor Control Board |
| resistance | 5-15 ohms |
| part_number | 5304511250 |
| voltage_rating | 120V AC |
Common Questions
What does E57 error mean on Frigidaire washing machine?
E57 signifies a motor control issue, often due to high current in the motor circuit.
Can I fix Frigidaire washing machine E57 error myself?
Yes, check for overloads, ensure level placement, and unplug the machine for 5 minutes before inspecting.
How much does it cost to fix E57 error?
Repair costs range from $150 to $700, depending on parts and labor.
When should I call a technician for E57?
Call if the error persists after basic checks, or if you're not comfortable with electrical repairs.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!