Frigidaire Washing Machine Error E44
⚡ Quick Answer: The Frigidaire washing machine error E44 indicates a malfunction in the door lock mechanism, preventing the washer from starting properly. This issue ... ✅ DIY Fixable
What Does Error E44 Mean?
The Frigidaire washing machine error E44 indicates a malfunction in the door lock mechanism, preventing the washer from starting properly. This issue can stem from a control board error or a problem with the door lock status signal. Users may experience symptoms such as the washer not starting, stopping mid-cycle, or displaying the error code on the panel.
Common Symptoms:
- Washer may not start
- Stops mid-cycle
- Error displayed on panel
Possible Causes
- Control board (PCB) error detected by internal diagnostics (medium)
- Door lock status signal error (medium)
How to Fix Error E44
DIY Fix Basic checks and reset
- Turn off and unplug the washer from power.
- Wait 5 minutes to allow the control board to reset.
- Plug the washer back in and attempt a restart.
- Ensure the door/lid is fully closed and latched before starting a cycle.
Technician Only Service control board and door lock circuit
- With power disconnected, inspect the main control PCB for signs of damage, corrosion, or burnt components.
- Test the door lock assembly and its wiring harness for proper continuity and feedback signals.
- Replace the control board if diagnostics confirm PCB failure.
- Replace the door lock assembly if it fails feedback tests or shows mechanical failure.
Parts needed: Main control board (PCB), Door lock/latch assembly
- If E44 persists after reset and basic door closure checks
- If diagnostic testing indicates failed PCB or door lock circuitry
Next step
Choose the next step for E44
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E44 error mean on frigidaire washing machine?
E44 indicates a door lock malfunction, preventing the washer from starting.
Can I fix frigidaire washing machine E44 error myself?
Yes, try turning off the washer, unplugging it, waiting 5 minutes, then restarting.
How much does it cost to fix E44 error?
Repair costs range from $150 to $400+, depending on parts and labor.
When should I call a technician for E44?
Call a technician if E44 persists after basic checks or if diagnostics indicate a failed PCB.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!