Frigidaire Washing Machine Error E35
⚡ Quick Answer: The Frigidaire washing machine E35 error indicates a malfunction in the water-level pressure sensor, signaling an overfill condition. This error is of... ✅ DIY Fixable
What Does Error E35 Mean?
The Frigidaire washing machine E35 error indicates a malfunction in the water-level pressure sensor, signaling an overfill condition. This error is often accompanied by symptoms such as excessive water in the drum, continuous filling, or a wash cycle that halts during the fill stage. Potential causes include a faulty pressure switch, a stuck-open water inlet valve, or wiring issues between the sensor and control board.
Common Symptoms:
- Error E35 displayed on the washer control panel during or shortly after water fill cycle
- Washer showing too much water in the drum
- Continuous or uncontrolled water filling
- Wash cycle halts or won’t start beyond fill stage
Possible Causes
- Water-level pressure sensor detected overfill (high)
- Stuck-open or leaking water inlet valve causing continuous water entry (medium)
- Faulty or misreading pressure switch (water-level sensor) (medium)
- Loose or damaged wiring between pressure sensor and control board (medium)
How to Fix Error E35
DIY Fix Verify actual water level and reset the washer
- Stop the cycle and check the water level inside the drum.
- If water looks normal, unplug the washer from power for 5–10 minutes to reset the control.
- Restart the washer to see if E35 reappears.
Technician Only Inspect and test water inlet valve and pressure sensor
- Disconnect power and water supply.
- Test or replace the water inlet valve if it continues to allow water flow when de-energized.
- Inspect and test pressure sensor for correct function; replace if faulty.
- Check wiring harness and connections between sensor and control board for damage or looseness and repair as needed.
Parts needed: Water inlet valve assembly, Water-level pressure sensor (pressure switch), Wiring harness/connectors
- If water continues to fill uncontrollably after unplugging water supply — immediate professional service recommended due to flooding risk.
- If testing/replacing parts does not clear the error or if internal electrical diagnostics are required.
Next step
Choose the next step for E35
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E35 error mean on Frigidaire washing machine?
E35 indicates an overfill condition detected by the water-level pressure sensor, often causing excessive water in the drum.
Can I fix Frigidaire washing machine E35 error myself?
Yes, verify the water level and reset the washer by unplugging it for 5–10 minutes.
How much does it cost to fix E35 error?
The estimated repair cost ranges from $75 to $250 for parts, depending on the model and region.
When should I call a technician for E35?
Call a technician if water continues to fill uncontrollably or if internal diagnostics are needed after testing components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!