Frigidaire Washing Machine Error E13

⚡ Quick Answer: The E13 error code on your Frigidaire washing machine indicates a water leak detected in the tub or an issue with the water level pressure sensor air ... ✅ DIY Fixable

What Does Error E13 Mean?

The E13 error code on your Frigidaire washing machine indicates a water leak detected in the tub or an issue with the water level pressure sensor air hose. This malfunction can lead to the washer stopping mid-cycle, continuous draining attempts, or visible water accumulation under the machine. Promptly addressing this issue is crucial to prevent further damage and ensure proper functioning.

Common Symptoms:

  • Washer stops mid‑cycle and displays E13
  • Possible water dripping in base pan or from tub
  • Machine may attempt to drain continuously
  • Error persists even after a reset

Possible Causes

  • Actual water leak in wash tub or base pan (high)
  • Air leak or disconnection in water level pressure sensor air hose (high)
  • Faulty water level pressure sensor (medium)

How to Fix Error E13

DIY Fix Initial Inspection and Reset

  1. Unplug the washer and turn off water supply.
  2. Check around and under the washer for visible water.
  3. Dry any standing water in the base pan.
  4. Verify hoses are securely connected and not visibly damaged.
  5. Plug in the washer and run a short cycle to see if code reappears.

Technician Only Diagnose and Repair Leak or Sensor Issue

  1. Remove access panels and inspect tub and base pan for cracks or leakage pathways.
  2. Inspect and test pressure sensor air hose for tears, disconnection, or air leaks; replace hose if damaged.
  3. Test water level pressure sensor functionality; replace if failing diagnostic tests.
  4. Verify all clamps, connections, and seals around hoses and the tub.

Parts needed: Water level pressure sensor, Pressure sensor air hose, Tub/detergent pan seals and clamps

🛑 When to Call a Pro:
  • If you find significant water pooling under the washer
  • If the pressure sensor or air hose appears damaged but you lack tools/experience to replace
  • If you cannot locate the source of the leak after basic checks

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number 137006000
voltage_rating 120V AC

Common Questions

What does E13 error mean on frigidaire washing machine?

E13 error indicates a water leak or problem with the water level pressure sensor, causing the washer to stop mid-cycle.

Can I fix frigidaire washing machine E13 error myself?

Yes, you can perform initial inspections, check for leaks, and reset the machine by unplugging it.

How much does it cost to fix E13 error?

Repair costs for the E13 error typically range from $50 to $250, depending on parts and labor.

When should I call a technician for E13?

Call a technician if you find significant water pooling, if parts are damaged, or if you can't locate the leak.

Sources & References

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!