Frigidaire Washing Machine Error E11
⚡ Quick Answer: The Frigidaire Washing Machine E11 error indicates that the washer is experiencing a long fill time, preventing it from properly filling with water du... ✅ DIY Fixable
What Does Error E11 Mean?
The Frigidaire Washing Machine E11 error indicates that the washer is experiencing a long fill time, preventing it from properly filling with water during the wash cycle. This often results from issues such as insufficient water supply, low water pressure, clogged inlet hose screens, or a faulty water inlet valve. If you see the E11 error, it’s crucial to check your water supply and hoses before considering more complex repairs.
Common Symptoms:
- Washer pauses or stops early in the cycle due to lack of water fill
- Drum does not fill with expected water level within normal time
- Display shows E11 during fill phase
Possible Causes
- Insufficient water supply or low water pressure (high)
- Clogged or restricted inlet hose screens (high)
- Faulty or partially operating water inlet valve (high)
- Faulty water level pressure switch or pressure hose issues (medium)
How to Fix Error E11
DIY Fix Basic checks for water supply and hoses
- Ensure both cold and hot water supply valves are fully open.
- Check that inlet hoses are not kinked, pinched, or blocked.
- Inspect and clean the inlet screens on hose connections if accessible.
- Verify household water pressure at other faucets to ensure adequate flow.
DIY Fix Reset the washer
- Unplug the washer or switch off its circuit breaker.
- Wait at least one minute.
- Restore power and restart a wash cycle to see if error clears.
Technician Only Inspect and replace water inlet valve
- Disconnect power and water to the washer.
- Remove access panel to reach inlet valve.
- Test valve continuity with a multimeter.
- Replace valve if defective or if screens are clogged beyond cleaning.
Parts needed: Water inlet valve assembly
Technician Only Inspect water level pressure switch and hose
- Disconnect power and access control panel to locate pressure switch and hose.
- Check pressure hose for blockages, cracks, or kinks.
- Test switch operation and replace if faulty.
Parts needed: Water level pressure switch, Pressure hose
- If after basic checks and reset the error persists
- If internal components such as the water valve or pressure switch need replacement and you are not comfortable doing it
Next step
Choose the next step for E11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Water Inlet Valve |
| resistance | 2,000-3,000 ohms |
| part_number | 137108000 |
| voltage_rating | 120V AC |
Common Questions
What does E11 error mean on Frigidaire Washing Machine?
E11 indicates a long fill time, causing the washer to pause or stop due to insufficient water.
Can I fix Frigidaire Washing Machine E11 error myself?
Yes, you can check water supply and hoses, and reset the washer to potentially clear the error.
How much does it cost to fix E11 error?
$50–$150 for parts like the water inlet valve, plus possible additional labor costs.
When should I call a technician for E11?
Call a technician if the error persists after basic checks and resets or if internal components need replacement.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!