Siemens Dishwasher: error code E25

Professional Repair Guide

What is this symptom?

If your Siemens dishwasher displays the E25 error code, it indicates a drainage malfunction. You may notice water pooling in the tub, suggesting issues such as clogged filters, blocked pump impellers, or kinks in the drain hose. Resolving this issue is crucial for restoring proper functionality.

Urgency: Medium

Possible Causes

Clogged drain filter

How to Identify: Standing water at cycle end, visible debris in filter, slow or no drainage

Part: Filter (lower sump area)

Blocked drain pump impeller or sump debris

How to Identify: Fish out debris; impeller not spinning freely when checked after disassembly; grinding noise from pump

Part: Drain pump / impeller

Clogged or kinked drain hose

How to Identify: Hose bent, compressed, or clogged; water not flowing out when hose is flushed

Part: Drain hose

Preventive Maintenance

  • Clean filter regularly: Food debris buildup that can cause E25
    Frequency: weekly or after heavy use
  • Inspect and flush drain hose periodically: Hose blockages or kinks that impede drainage
    Frequency: every 3-6 months

Frequently Asked Questions

Why is my Siemens Dishwasher Error code E25?
The E25 error indicates a drainage issue, often due to clogged filters, blocked pump impellers, or kinked drain hoses.
How do I fix Siemens Dishwasher Error code E25 myself?
Currently, there are no DIY solutions recommended for this error.
How much does it cost to fix Error code E25?
Professional repair costs may vary, but specific costs are not listed.
When should I call a technician for Error code E25?
If the issue persists despite troubleshooting, or if you're unsure about the drainage system, consider calling a technician.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Blocked drain pump or filter
  • Faulty drain pump
  • Kinked or clogged drain hose

User Suggested Solutions

  1. Check and clean the drain pump and filter. Disconnect the dishwasher, remove the bottom spray arm, and then take out the filter and drain pump. Clean any debris and reassemble.

  2. Inspect the drain pump for faults. If the pump is not working, replace it by disconnecting the power, removing the pump, and installing a new one.

  3. Examine the drain hose for kinks or clogs. Ensure the hose is properly routed and clear of blockages. Replace if damaged.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Siemens dishwasher iQ700 Error E25

Community Discussions

Error E25

Replaced the dishwasher instead of repairing it due to high costs.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!