Maytag Dishwasher: not working

Possible Causes

Dishwasher not receiving power or reset needed

How to Identify: No lights on control panel, no noise, and checking the outlet or breaker shows tripped breaker or unplugged connection.

Part: Power supply / circuit breaker

Control lock or delay start activated

How to Identify: Control lock icon is illuminated or dishwasher shows delay start status and won’t start immediately.

Part: Control panel settings

Faulty control panel / electronic control board

How to Identify: Dishwasher makes no response but power confirmed available; resetting or cycling fails to fix; error codes or inconsistent behavior may appear.

Part: Control board

Internal component failure (e.g., thermal fuse or motor)

How to Identify: Dishwasher has power and door is latched but still no start; may show no control response or burn smell.

Part: Thermal fuse / motor assembly

DIY Solutions

Check power supply and reset dishwasher

Easy 10 minutes

Tools Needed: none

1. Confirm dishwasher is plugged in and outlet is live (test with another device).
2. Check home circuit breaker for a tripped breaker and reset if tripped.
3. Unplug dishwasher or turn off breaker for 30 seconds then restore power to reset control. (Product Help | Maytag

⚠️ Safety First: Ensure hands are dry and power is off when accessing plugs or breaker.

Ensure door is fully closed and latched

Easy 5 minutes

Tools Needed: none

1. Open dishwasher door and inspect latch for debris or obstruction.
2. Firmly close door until latch clicks.
3. Try starting dishwasher again. (Product Help | Maytag

Disable control lock or delay start

Easy 5 minutes

Tools Needed: none

1. Check control panel for lock or delay indicators.
2. Press and hold appropriate button(s) to disable control lock according to manual.
3. Cancel any delay start settings and press start. (Product Help | Maytag

Next step

Choose the next step for not working

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Power Control Board

Distributes and switches electrical power for the appliance's major loads.

Typical part-only price

$90 - $260

DIY difficulty

Hard

Estimated time

30-75 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

$120 - $280 · Medium · 20-40 mins

Check fit & price

Possible related component

Thermal Fuse

A safety device that cuts off power to the appliance if it starts to overheat.

$10 - $20 · Easy · 10-20 mins

Check fit & price

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply

Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace control panel or electronic control board

Estimated Cost: $200 - $500

Replace thermal fuse or internal motor component

Estimated Cost: $100 - $400

When to Call a Professional

Dishwasher still doesn’t start after all DIY checks (power, door latch, control lock, resets).

Burning smell or visible electrical issues when attempting to start.

Error codes indicating internal faults not resolved by basic resets.

Preventive Maintenance

• Regularly check and clean door latch and seals: Latch misalignment or debris causing start problems
  Frequency: monthly
• Run empty cycle with no dishes to keep controls and components active: Stagnation and potential setting lock issues
  Frequency: monthly

Frequently Asked Questions

Why is my Maytag Dishwasher not working?

Common causes include power issues, activated control lock, or a faulty control panel.

How do I fix Maytag Dishwasher not working myself?

Check the power supply, ensure the door is closed, and disable control lock or delay start.

How much does it cost to fix not working?

Professional repairs can cost between $100 and $500 depending on the issue.

When should I call a technician for not working?

If DIY solutions fail or if internal components need replacement, it's time to call a professional.

References & Sources

• Dishwasher Not Starting or Not Operating - Maytag Official
• Troubleshooting a Dishwasher That Won't Start Community

Common Issues Reported by Users

• Touch control failure (1 mentions)
• Controller malfunction (1 mentions)

User Suggested Solutions

1. Replaced the controller on top

Community Discussions

stopped working with F6 E1 code

Replaced the controller on top and it fixed the issue.

DIY View on Reddit →

Source: Reddit r/appliancerepair