Maytag Dishwasher: not running during wash cycle
What is this symptom?
Experiencing issues with your Maytag dishwasher not running during the wash cycle? This problem may manifest as the machine pausing, stalling, or failing to spray water, even though the control lights are on. Understanding the common causes can help you troubleshoot effectively and restore functionality.
Important Tips for Maytag Models
- Maytag manuals specifically note pausing of cycles for thermal holds and require starting/resuming if power interruption or door opening occurs.
Possible Causes
Door not properly latched or cycle paused
How to Identify: Dishwasher pauses with Start/Resume indicator flashing; door not fully secured.
Part: Door latch / cycle controls
Control Lock / Delay Start engaged
How to Identify: Control Lock icon illuminated or Delay Start countdown active; dishwasher appears inactive after pressing start.
Part: Control panel settings
Electrical power interruption or blown breaker
How to Identify: No response when pressing start; lights may be dim/off; breaker may be tripped.
Part: Power supply / circuit breaker
Faulty door latch/switch assembly
How to Identify: Dishwasher will not run unless door is forced shut; clicking without initiating cycle.
Part: Door latch / door switch
Control board or timer failure
How to Identify: Dishwasher is unresponsive after rule‑out of basic issues; electronic controls fail to send voltage to components.
Part: Main control board / timer
DIY Solutions
Ensure door is fully latched and resume cycle
- Open the dishwasher door and close it firmly until it latches.
- Press START/RESUME within a few seconds to continue the cycle.
Cancel Delay Start / Control Lock
- Check if Delay Start is active and cancel it via control panel.
- Verify if Control Lock feature is on (lock icon) and disable according to model instructions.
- Restart the desired wash cycle.
Reset dishwasher by power cycling
- Turn off power to the dishwasher at the circuit breaker or unplug it.
- Wait at least 1 minute.
- Restore power, close door, select cycle, and press Start.
Next step
Choose the next step for not running during wash cycle
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
- Typical part-only price
- $15 - $80
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Power Control Board
Distributes and switches electrical power for the appliance's major loads.
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace door latch or door switch assembly
Replace main control board or timer
When to Call a Professional
Preventive Maintenance
-
Clean filter and spray arms: Blockages that can indirectly contribute to cycle issues over time
Frequency: monthly
Frequently Asked Questions
Why is my Maytag Dishwasher not running during wash cycle?
How do I fix Maytag Dishwasher not running during wash cycle myself?
How much does it cost to fix not running during wash cycle?
When should I call a technician for not running during wash cycle?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Door latch not engaging properly
- Faulty control board
- Clogged filter or spray arms
User Suggested Solutions
-
Check and secure the door latch. Open the door and close it firmly to ensure the latch engages. If it appears damaged, replace it.
-
Inspect the control board for any visible damage or burnt components. If found, replace the control board.
-
Remove and clean the filter and spray arms to ensure they are not clogged. Run water through them to check for blockages.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!