Maytag Dishwasher: not drying
What is this symptom?
If your Maytag dishwasher is leaving dishes wet or damp after a complete wash cycle, even with the drying options selected, you may be facing a common issue. This can be frustrating, especially when you expect your dishes to come out clean and dry. Understanding the potential causes can help you troubleshoot the problem effectively.
Possible Causes
Drying cycle/settings not selected or inappropriate cycle
How to Identify: Check if Heated Dry, Extended Dry, or Pro Dry options were selected; eco/air‑dry or quick wash cycles may not include drying.
Part: Control panel / cycle selection
Insufficient or absent rinse aid
How to Identify: Observe that rinse aid reservoir is empty or not dispensing; presence of water droplets or spots on dishes.
Part: Rinse aid dispenser
Next step
Choose the next step for not drying
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Detergent Dispenser
Releases detergent, bleach, or rinse aid at the correct moment in the cycle.
- Typical part-only price
- $30 - $70
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Preventive Maintenance
-
Refill rinse aid regularly: Poor drying performance
Frequency: Every 1–2 weeks -
Clean filter and vent monthly: Blockages affecting drying and wash performance
Frequency: Monthly -
Load dishes properly each cycle: Trapped water and poor airflow leading to wet dishes
Frequency: Every use
Frequently Asked Questions
Why is my Maytag Dishwasher not drying?
How do I fix Maytag Dishwasher not drying myself?
How much does it cost to fix not drying?
When should I call a technician for not drying?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Heating element failure (1 mentions)
- Control board malfunction (1 mentions)
User Suggested Solutions
-
Run the unit in test mode to reset the heater lockout
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
isn't drying dishes to completion
User was advised to run the unit in test mode to reset the heater lockout.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!