Kenmore Dishwasher: making noise
What is this symptom?
Is your Kenmore dishwasher making unusual noises like buzzing, grinding, or rattling? Such sounds can indicate issues during wash, fill, or drain cycles. It's essential to address these noises promptly, as they may stem from common problems such as worn pump bearings, obstructed spray arms, or foreign debris in the sump area.
Important Tips for Kenmore Models
- Kenmore models often share pump and motor assembly issues due to wear on bearings and impellers.
Possible Causes
Worn or damaged circulation pump bearings or impeller
How to Identify: Loud grinding, squealing, or humming noise during wash cycle; persistent noise even with normal loading.
Part: Circulation pump / wash motor
Objects or debris stuck in pump/chopper area
How to Identify: Grinding or scraping noise; inspect lower tub and sump for broken glass or food debris.
Part: Drain pump / chopper blade area
Obstructed or loose spray arms
How to Identify: Rattling or clanking noise as spray arms hit utensils; noise correlates with spray arm rotation.
Part: Spray arms
Faulty water inlet valve
How to Identify: Buzzing, vibrating, or squealing noise predominantly during fill cycle.
Part: Water inlet valve
Foreign items in sump or blocked drainage
How to Identify: Rattling, crackling noises plus possible draining issues.
Part: Drain pump / sump area
DIY Solutions
Clear debris and check spray arms
- Turn off power
- Remove lower rack and spray arms
- Check and clean spray arm holes and sump area of debris
- Reassemble and test noise level
Inspect and clean drain pump area
- Turn off and unplug dishwasher
- Remove lower access panel and disconnect drain pump if accessible
- Inspect for and remove debris from pump and chopper area
- Reassemble and test unit
Next step
Choose the next step for making noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace circulation pump or wash motor assembly
Replace water inlet valve
When to Call a Professional
Preventive Maintenance
-
Clean filters and spray arms: Noise from debris and obstructions
Frequency: monthly -
Check for loose utensils and proper loading: Rattling and spray arm obstruction noises
Frequency: each use
Frequently Asked Questions
Why is my Kenmore Dishwasher making noise?
How do I fix Kenmore Dishwasher making noise myself?
How much does it cost to fix making noise?
When should I call a technician for making noise?
References & Sources
- Kenmore dishwasher noise discussions Community
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Foreign object in the impeller or spray arm
- Worn out or damaged motor bearings
- Faulty wash pump or motor assembly
User Suggested Solutions
-
Inspect the spray arm and impeller for any foreign objects. Remove any debris that may be causing the noise. Check for proper rotation of the spray arm.
-
Test the motor bearings by manually rotating the motor shaft. If it feels gritty or does not turn smoothly, replace the motor bearings.
-
Check the wash pump and motor assembly for any signs of wear or damage. If faulty, replace the entire assembly as needed.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!