Kenmore Dishwasher: damaged hose
What is this symptom?
If your Kenmore dishwasher is leaking water, it may have a damaged hose. Common signs include visible cracks or splits in the supply or drain hose, leading to water escaping during operation. This often results in wet floors and may trigger error codes. Understanding the causes and taking action can help prevent further damage.
Important Tips for Kenmore Models
- Kenmore-specific manuals seldom list hose damage as a unique failure but general leakage troubleshooting includes hose inspection
Possible Causes
Physical damage to drain or supply hose (cracks, splits)
How to Identify: Visible cracks, splits, or wet spots along hose during or after operation; water pooling under dishwasher base
Part: Drain hose or supply hose
Loose hose connection at fittings
How to Identify: Leak appears specifically at connection junctions between hose and dishwasher or plumbing; hose feels loose
Part: Hose connection fittings
Kinked or bent hose causing stress damage
How to Identify: Hose shows sharp bends or kinks; hose blocked or water draining poorly; potential weakened hose leading to eventual split
Part: Drain hose
DIY Solutions
Inspect and Replace Damaged Hose
- Turn off water supply and power to dishwasher
- Pull dishwasher out to access back and inspect hoses for visible damage
- Loosen hose clamps with screwdriver or wrench
- Remove damaged hose and install new hose of appropriate length and rating
- Tighten clamps securely and check hose routing to avoid kinks
- Restore power and water, run short cycle to check for leaks
Tighten Loose Hose Connections
- Turn off water supply and power
- Locate hose connections at dishwasher and plumbing side
- Use screwdriver or wrench to tighten hose clamps securely
- Restore water and power, test cycle to check for leaks
Next step
Choose the next step for damaged hose
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Professional Hose Replacement
Plumbing Reconnection and Leak Diagnosis
When to Call a Professional
Preventive Maintenance
-
Inspect hoses annually for wear or kinks: Leakage due to hose degradation
Frequency: annually -
Ensure proper hose routing avoiding sharp bends: Stress damage and kinks leading to failure
Frequency: upon installation and check annually
Frequently Asked Questions
Why is my Kenmore Dishwasher damaged hose?
How do I fix Kenmore Dishwasher damaged hose myself?
How much does it cost to fix damaged hose?
When should I call a technician for damaged hose?
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Rubber hose chewed by pets (e.g., ferrets, dogs)
- Hose deterioration due to age and wear
- Improper installation leading to stress on the hose
User Suggested Solutions
-
Inspect the hose for damage, then replace it with a new hose. Ensure the new hose is properly secured and positioned to avoid future chewing.
-
Use protective coverings or wraps on the hose to deter pets from chewing. This can include using PVC tubing or other protective materials.
-
Reassess the installation of the hose to ensure it is not under stress. Adjust the positioning if necessary to prevent future damage.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!