Indesit Washing Machine: rubbing on door seal, unusual noise during spin

Professional Repair Guide

What is this symptom?

Experiencing a rubbing sensation and unusual noises from your Indesit washing machine during the spin cycle? This common issue often stems from foreign objects caught in the door seal, an unbalanced load, or worn components. Rubber shavings in the seal may also indicate damage, requiring immediate attention.

Urgency: Medium

Important Tips for Indesit Models

  • Some Indesit models are reported to have bearing wear over time leading to noise; ensure warranty status before DIY.

Possible Causes

Foreign object trapped between drum and door seal

How to Identify: Presence of debris/rubbed rubber inside door seal and noise localized near opening; visual inspection shows object or residue

Part: Door seal / drum gap

Unbalanced load causing drum contact with seal

How to Identify: Noise and vibration during spin that changes with load distribution; redistributing clothes reduces noise

Part: Drum/load distribution

Worn or damaged drum bearings

How to Identify: Grinding/rumbling noise that increases with spin speed; manual spin feels rough; rubber debris may accompany bearing wear if seal compromised

Part: Drum bearings

Distorted or damaged door seal (gasket)

How to Identify: Visual deformation/tears in door seal; contact during drum rotation; noise and rubbing marks on rubber

Part: Door seal / gasket

Worn suspension springs or shock absorbers

How to Identify: Excessive vibration and knocking during spin, unrelated to seal contact; machine feels unstable

Part: Suspension/shock absorbers

DIY Solutions

Check and remove foreign objects

Easy 10-20 minutes
Tools Needed: flashlight
  1. Stop machine and unplug.
  2. Inspect inside drum and around door seal for debris.
  3. Remove any objects and wipe away rubber shavings.
  4. Run an empty spin cycle to test.
  5. Observe any remaining noise or seal contact.
⚠️ Safety First: Always unplug before reaching into machine

Redistribute laundry load for balance

Easy 5 minutes
  1. Pause the wash cycle.
  2. Open door and redistribute clothes evenly around drum.
  3. Avoid washing single heavy items alone.
  4. Restart spin cycle to check noise reduction.

Inspect and adjust leveling

Moderate 10-30 minutes
Tools Needed: spirit level, wrench
  1. Place spirit level on top surface of machine.
  2. Adjust feet until machine is level.
  3. Tighten locking nuts on feet.
  4. Test spin cycle for reduction of vibration/noise.

Next step

Choose the next step for rubbing on door seal, unusual noise during spin

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Door Gasket

Creates a watertight seal around the door to prevent leaks during operation.

Typical part-only price
$45 - $110
DIY difficulty
Medium
Estimated time
30-60 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drum Bearing Kit

Supports the spinning drum and ensures smooth, quiet rotation during cycles.

$40 - $95 · Hard · 120-180 mins

Check fit & price
Possible related component

Washer Shock Absorber

Dampens tub movement and vibration during high-speed spin cycles.

$25 - $100 · Medium · 45-90 mins

Check fit & price
Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply
Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply
Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace worn bearings

Estimated Cost: $80 - $250

Replace door seal/gasket

Estimated Cost: $40 - $120

Replace suspension/shock absorbers

Estimated Cost: $50 - $150

When to Call a Professional

Noise persists after redistributing load and basic checks
Grinding or metal‑on‑metal sounds suggesting bearings
Visible damage to door seal requiring replacement

Preventive Maintenance

  • Check drum and seal for foreign objects: Noise and seal wear from debris
    Frequency: monthly
  • Ensure machine is level: Unbalanced spin vibration
    Frequency: quarterly

Frequently Asked Questions

Why is my Indesit Washing Machine rubbing on door seal, unusual noise during spin?
Common causes include foreign objects trapped in the seal, an unbalanced load, or worn parts, like drum bearings.
How do I fix Indesit Washing Machine rubbing on door seal, unusual noise during spin myself?
Check for and remove foreign objects, redistribute the laundry load, and adjust the machine's leveling.
How much does it cost to fix rubbing on door seal, unusual noise during spin?
Professional repairs can range from $40 to $250 depending on parts like bearings or the door seal.
When should I call a technician for rubbing on door seal, unusual noise during spin?
If DIY fixes don't resolve the issue or if you suspect serious damage, it's time to call a technician.

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • Foreign objects trapped in the door seal or drum
  • Worn or damaged door seal causing misalignment
  • Unbalanced load leading to excessive vibration during spin

User Suggested Solutions

  1. Inspect the door seal for foreign objects. Remove any items such as coins or fabric that may be trapped. Check the drum for any obstructions as well.

  2. Examine the door seal for any signs of wear or damage. If the seal is compromised, replace it with a new one. Ensure it is seated properly to avoid misalignment.

  3. Redistribute the load inside the drum evenly. If the load is unbalanced, it can cause excessive vibration and noise during the spin cycle.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Washing machine help

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318