Indesit Washing Machine: not functioning
What is this symptom?
If your Indesit washing machine is not functioning, it may refuse to start, showing no lights or sounds when you press the start button. This issue can occur even when the machine is plugged in and connected to a water supply, leaving you puzzled about why it won't run its wash cycles.
Important Tips for Indesit Models
- Indesit official troubleshooting highlights specific non‑start or no electrical supply scenarios and recommends checking power and error codes before further repair.
Possible Causes
Power supply issue
How to Identify: No lights or motor sounds; other appliances don’t work on same outlet; tripped breaker evident.
Part: Power cord / outlet / circuit breaker
Defective motor or related components
How to Identify: Machine fills with water but motor doesn’t run; drum doesn’t turn by hand or shows stiff movement.
Part: Motor / motor brushes / motor wiring
DIY Solutions
Check power supply and reset breaker
- Ensure the machine is plugged into a working outlet.
- Test the same outlet with another device to confirm power.
- Check your home’s circuit breaker and reset if tripped.
Ensure the door is properly closed and reset
- Open and then firmly close the washing machine door until it clicks.
- Attempt to start a cycle again.
- If available, unplug the machine for 3–5 minutes then plug back in to reset electronics.
Next step
Choose the next step for not functioning
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Power Cord
Supplies mains power to the appliance and includes the model-specific plug and terminal connection.
- Typical part-only price
- $15 - $70
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace or repair electronic control board
Motor or motor component repair/replacement
When to Call a Professional
Preventive Maintenance
-
Regularly check and clean door seal and latch: Door interlock faults that prevent starting
Frequency: monthly -
Check electrical connections and outlet function: Unexpected power failure related issues
Frequency: annually
Frequently Asked Questions
Why is my Indesit Washing Machine not functioning?
How do I fix Indesit Washing Machine not functioning myself?
How much does it cost to fix not functioning?
When should I call a technician for not functioning?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Power supply issue (tripped circuit breaker or blown fuse)
- Faulty control board or firmware corruption
- Malfunctioning water level sensor
User Suggested Solutions
-
Check the power supply. Ensure the washing machine is plugged in, and check the circuit breaker or replace any blown fuses. Restart the machine after fixing the power issue.
-
Reset the washing machine by unplugging it for 5-10 minutes. This can help clear any temporary firmware glitches. If the problem persists, consider updating or replacing the control board.
-
Inspect and test the water level sensor for proper operation. If faulty, replace the sensor. This may require accessing the internal components of the machine.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!