Indesit Washing Machine: drain pump full of water
What is this symptom?
Experiencing issues with your Indesit washing machine where the drain pump is full of water? This indicates that water is not being expelled from the drum, leading to potential flooding or performance issues. Common causes include a clogged drain pump filter, blocked drain hose, or a faulty drain pump. Understanding these issues can help you address the problem effectively.
Important Tips for Indesit Models
- Indesit support materials indicate that blocked pump filters are a leading cause for drainage failures and provide guidance on cleaning them.
Possible Causes
Clogged drain pump filter
How to Identify: Water remains after cycle; debris visible in accessible filter; machine may display drain error or not proceed to spin cycle.
Part: Drain pump filter
Blocked or kinked drain hose
How to Identify: Water won’t exit through hose when lowered into bucket; hose visibly kinked or pinched; removal of hose discharges water by gravity.
Part: Drain hose between washer and household drain
Sump hose or internal blockage near tub
How to Identify: Even after cleaning filter and drain hose, water still won’t drain; may require disassembly to inspect or remove lodged items.
Part: Internal sump hose connecting tub to pump
Faulty drain pump (mechanical/electrical failure)
How to Identify: No water moves even when drain hose and filter are clear; unusual noises from pump during cycle; pump doesn’t run.
Part: Drain pump
Unbalanced load or user error
How to Identify: Machine stops with water due to overload or uneven load triggering safety systems.
Part: N/A (load handling)
DIY Solutions
Clean drain pump filter
- Unplug the washing machine and place towels under the access panel at the base front.
- Open the filter access cover (usually lower right).
- Place a shallow container under the filter, slowly unscrew the filter cap to let water drain out.
- Remove debris and clean filter thoroughly.
- Replace filter and run a short drain/spin cycle to verify.
Inspect and clear drain hose
- Unplug washing machine and pull it away from wall.
- Disconnect the drain hose from the wall drain and lower end into a bucket.
- Check for obstructions by flushing water through or using a flexible brush.
- Reattach hose ensuring no kinks and secure clamps.
- Test drain cycle.
Next step
Choose the next step for drain pump full of water
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace faulty drain pump
When to Call a Professional
Preventive Maintenance
-
Clean drain pump filter: Build-up of debris that can cause drainage issues
Frequency: every 1-3 months -
Check drain hose for kinks: Hose blockages and poor drainage
Frequency: every 6 months
Frequently Asked Questions
Why is my Indesit Washing Machine drain pump full of water?
How do I fix Indesit Washing Machine drain pump full of water myself?
How much does it cost to fix drain pump full of water?
When should I call a technician for drain pump full of water?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Clogged drain filter preventing water from draining
- Blocked drain hose restricting water flow
- Faulty drain pump motor not functioning properly
User Suggested Solutions
-
1. Unplug the washing machine for safety. 2. Locate the drain filter, usually at the bottom front of the machine. 3. Open the filter cover and place a shallow container underneath to catch any water. 4. Remove the filter and clean it thoroughly. 5. Reinsert the filter and close the cover. 6. Plug the machine back in and run a drain cycle to check if the issue is resolved.
-
1. Unplug the washing machine. 2. Inspect the drain hose for kinks or blockages. 3. Disconnect the hose from both the machine and the drain. 4. Use a long object (like a flexible brush) to clear any obstructions. 5. Reattach the hose securely and ensure it is not kinked. 6. Plug the machine back in and test the drain function.
-
1. Unplug the washing machine. 2. Access the drain pump by removing the back panel of the machine. 3. Inspect the pump for any visible damage or blockages. 4. If the pump is faulty, disconnect the wiring and remove it for replacement. 5. Install a new pump and reconnect the wiring. 6. Replace the back panel, plug the machine back in, and test.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!