Indesit Washer Dryer: not starting
What is this symptom?
Is your Indesit Washer Dryer not starting? This common issue may leave you frustrated as the appliance shows no signs of operation, such as no drum movement or water fill. Potential causes could be a faulty door interlock, power supply issues, or control board failures. Understanding these factors can help you troubleshoot effectively.
Important Tips for Indesit Models
- Some models won’t start if Delay start mode is engaged; ensure this setting isn’t active.
Possible Causes
Door interlock not engaging
How to Identify: Machine doesn’t start and display may show door error or lights but no cycle begins; door feels loose or doesn’t click when closing.
Part: Door lock/interlock switch
Power supply issue (outlet, plug, lead)
How to Identify: Machine has no lights, no sound, outlet doesn’t supply power to other devices when tested.
Part: Power cord and mains connection
Control board/electronics fault
How to Identify: No response from control panel buttons, display blank or flashing error codes, resetting doesn’t help.
Part: Electronic control board (PCB)
Drive motor failure or related drive components
How to Identify: Machine fills with water but drum doesn’t turn, possible burning smell or stiffness manually rotating drum. (
Part: Motor, brushes, belt
Delay timer or incorrect settings engaged
How to Identify: Machine displays delay timer active, no start until countdown completes.
Part: Control settings/delay timer
DIY Solutions
Check and secure door closure
- Open the washer‑dryer door and ensure no laundry or obstruction prevents full closure.
- Close door firmly until you hear a click indicating latch engagement.
- Attempt to start a cycle again.
Verify power supply and reset machine
- Unplug machine from wall outlet.
- Check that the wall outlet is supplying power by testing another device.
- Wait 2–5 minutes unplugged to reset controls per manual guidance.
- Plug machine back in and attempt to start a cycle.
Next step
Choose the next step for not starting
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
- Typical part-only price
- $15 - $55
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Power Cord
Supplies mains power to the appliance and includes the model-specific plug and terminal connection.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace door lock/interlock assembly
Control board diagnosis and replacement
Motor and drive component repair or replacement
When to Call a Professional
Preventive Maintenance
-
Periodically check door latch for wear or debris: Door not closing properly which can prevent start
Frequency: monthly -
Inspect power cord and outlet connection: Power supply issues causing no start
Frequency: annually
Frequently Asked Questions
Why is my Indesit Washer Dryer not starting?
How do I fix Indesit Washer Dryer not starting myself?
How much does it cost to fix not starting?
When should I call a technician for not starting?
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Power supply issue (unplugged or faulty outlet)
- Door latch not engaging properly
- Faulty control board or timer
User Suggested Solutions
-
Check the power supply: Ensure the washer dryer is plugged in and the outlet is functional. Test the outlet with another device if necessary.
-
Inspect the door latch: Open and close the door firmly to ensure it latches properly. If the latch is broken or misaligned, it may need adjustment or replacement.
-
Test the control board: If the power and door latch are functioning, the control board may need to be tested for faults. This may require a multimeter and knowledge of electrical components.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!