Indesit Washer Dryer: banging noise
What is this symptom?
Experiencing a loud banging noise from your Indesit washer dryer during the spin cycle? This unsettling sound may also be accompanied by vibration and movement of the appliance, indicating potential issues that need addressing for optimal performance.
Important Tips for Indesit Models
- Indesit washer dryer banging noises are often linked to worn suspension components, unbalanced loads, or external placement issues specific to front-loading drum design
- Foreign objects and loose internal parts like bearings and shock absorbers are common causes of banging/knocking noises in Indesit washers
Possible Causes
Unbalanced laundry load
How to Identify: Noise occurs when heavy items cluster on one side or machine moves/vibrates during spin; redistributing load reduces noise temporarily
Part: Drum/load distribution
Machine not level or uneven floor placement
How to Identify: Appliance rocks or isn’t stable when nudged; banging occurs especially during spin cycles
Part: Adjustable feet/placement
Worn or damaged shock absorbers / suspension springs
How to Identify: Excessive drum movement and banging throughout cycle, not just due to load imbalance; machine may walk
Part: Shock absorbers/suspension springs
Foreign objects stuck between drum and tub
How to Identify: Metal clanking or sharp banging; checking pockets and between drum/tub reveals objects
Part: Drum/Tub area
Worn or damaged drum bearings
How to Identify: Grinding or rumbling with banging; drum may wobble when spun by hand; age-related wear
Part: Drum bearings
DIY Solutions
Redistribute laundry to balance load
- Pause the cycle and open the door
- Rearrange laundry evenly around the drum
- Ensure heavy items are spread out or wash bulky items in smaller loads
Level the washer dryer
- Place a spirit level on top of the machine to check level
- Adjust the four leveling feet by turning until machine is stable
- Test stability by gently rocking unit and run a short spin to confirm noise reduction
Remove foreign objects from drum and filter area
- Check pockets and remove any small items from laundry
- Inspect the drum interior for objects between drum and tub
- Clean out any debris in the pump filter following the manual’s instructions
Next step
Choose the next step for banging noise
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Appliance Leveling Leg
Supports and levels the appliance to reduce rocking, vibration, and door-alignment problems.
- Typical part-only price
- $8 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Washer Shock Absorber
Dampens tub movement and vibration during high-speed spin cycles.
Drum Bearing Kit
Supports the spinning drum and ensures smooth, quiet rotation during cycles.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace shock absorbers or suspension springs
Replace drum bearings or related drive components
When to Call a Professional
Preventive Maintenance
-
Level machine periodically: Noise and excessive vibration due to uneven placement
Frequency: monthly -
Check and clean pump filter: Objects causing noise and drainage issues
Frequency: monthly -
Avoid overloading the drum: Unbalanced loads and stress on suspension components
Frequency: Each load
Frequently Asked Questions
Why is my Indesit Washer Dryer banging noise?
How do I fix Indesit Washer Dryer banging noise myself?
How much does it cost to fix banging noise?
When should I call a technician for banging noise?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged shock absorbers
- Loose or damaged drum bearings
- Unbalanced load during the spin cycle
- Foreign objects trapped in the drum or pump
- Faulty suspension springs
User Suggested Solutions
-
Check and replace the shock absorbers. Start by unplugging the washer dryer. Remove the back panel to access the shock absorbers. Inspect for wear or damage and replace if necessary.
-
Inspect and replace drum bearings. Unplug the machine, remove the front panel, and check the bearings for wear. If they are damaged, replace them with new ones.
-
Redistribute the load inside the drum. Pause the cycle, open the door, and redistribute clothes evenly before resuming the spin cycle.
-
Check for foreign objects in the drum or pump. Inspect the drum for any items that may have been left in pockets and check the pump filter for blockages.
-
Inspect and replace suspension springs if needed. Unplug the unit, remove the top panel, and check the springs for damage. Replace as necessary.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
banging noise while spinning
Possible issues include shock absorbers or drum bearings; start with checking shock absorbers.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!