Indesit Washer Dryer: lights flashing

Professional Repair Guide

What is this symptom?

If your Indesit Washer Dryer has flashing lights, it indicates a fault or error preventing normal operation. These flashing patterns correlate with internal fault codes related to drainage issues, door lock problems, or electronic malfunctions, occurring at various stages of the wash cycle. Understanding the cause is key to restoring functionality.

Urgency: Medium

Important Tips for Indesit Models

Indesit washer / washer dryer models use predefined flashing light patterns to indicate specific Fâ€‘codes corresponding to internal faults (e.g., F05 for drainage, F01/F02 for motor).

Possible Causes

Drainage failure / pump or filter blockage (common F05 error)

How to Identify: Water remains in drum; lights flash continuously; washing cycle does not advance; blocked pump filter or kinked drain hose.

Part: Drain pump / pump filter / drain hose

Unbalanced or overloaded drum

How to Identify: Spin or load indicator flashing; heavy or uneven load noticed. (

Part: Drum load distribution

Control board or electronics fault

How to Identify: Erratic flashing of many lights without clear pattern, or simultaneous all lights; resetting/power cycling doesnâ€™t help. (

Part: Main control PCB

Motor / tachometer circuit issues

How to Identify: Specific blinking patterns corresponding to F01 or F02 codes; machine fails to spin. (

Part: Motor / tachometer

DIY Solutions

Clean drain pump filter and hoses

Moderate 15-30 minutes

Tools Needed: towel or tray, screwdriver (if needed)

Turn off and unplug the washer dryer.
Locate the drain pump filter access cover at the bottom front of the machine.
Place a towel or tray under it to catch water, then open and unscrew the filter cap.
Remove any debris (lint, coins, small items) from the filter and pump housing.
Check the drain hose for kinks or blockages and clear them if present.
Replace the filter cap securely and restart the machine.

⚠️ Safety First: Always unplug the appliance before accessing internal parts to avoid electric shock.

Redistribute laundry load

Easy 5 minutes

Stop the current cycle and open the door if safe.
Remove some items to balance the load evenly around the drum.
Close the door and restart the spin cycle.

Check and secure door latch

Moderate 10 minutes

Tools Needed: screwdriver (if needed)

Ensure washer dryer is unplugged.
Inspect around the door seal for trapped fabric or debris preventing latch engagement.
Press firmly on door until it clicks closed.
If still not engaging, inspect latch for visible damage or misalignment.

Professional Repairs

Replace drain pump or motor

Estimated Cost: $80 - $250

Control board diagnostics and replacement

Estimated Cost: $150 - $400

Replace door lock/interlock switch

Estimated Cost: $60 - $180

When to Call a Professional

Flashing lights persist after cleaning filter, clearing hoses, and resetting power.

Control panel erratically flashes all lights with no identifiable pattern.

Door lock mechanism appears damaged or not engaging.

Motor or electrical faults are suspected (e.g., F01 / F02 patterns) and DIY diagnostics are inconclusive.

Preventive Maintenance

Clean drain pump filter: Drainage blockages that cause flashing error lights.
Frequency: monthly
Check and redistribute drum load: Unbalanced load detection and spin issues.
Frequency: per wash

Frequently Asked Questions

Why is my Indesit Washer Dryer lights flashing?

The flashing lights indicate a fault such as drainage failure, an overloaded drum, or a control board issue.

How do I fix Indesit Washer Dryer lights flashing myself?

You can clean the drain pump filter, redistribute the laundry load, or check the door latch.

How much does it cost to fix lights flashing?

Professional repairs can range from $60 to $400 depending on the issue, such as replacing the drain pump or control board.

When should I call a technician for lights flashing?

Call a technician if DIY solutions fail or if the issue seems complex, especially with control board diagnostics.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Power supply issue or unstable voltage
Faulty door latch or door not properly closed
Blocked or malfunctioning water inlet valve

User Suggested Solutions

Check the power supply by ensuring the washer dryer is plugged in and the outlet is functioning. Use a multimeter to test voltage stability.
Inspect the door latch mechanism for any damage or obstructions. Ensure the door is fully closed and latched before starting a cycle.
Examine the water inlet valve for blockages or faults. Clean any debris and test the valve for proper operation.