Hotpoint Washer Dryer: rattling sound

Professional Repair Guide

What is this symptom?

Experiencing a rattling sound from your Hotpoint washer dryer during spin or drying cycles? This issue can be intermittent or continuous and may be accompanied by vibrations or banging noises, indicating potential problems that need attention.

Urgency: Medium

Important Tips for Hotpoint Models

  • Hotpoint official troubleshooting notes that removal of shipping/transit bolts and ensuring level installation reduces noise.

Possible Causes

Foreign objects in drum or pump

How to Identify: Rattling noise changes when slowing/stopping drum; objects like coins may be heard hitting tub; inspect drum interior.

Part: Drum interior / Pump area

Unremoved transit/shipping bolts

How to Identify: Noise present from first use and machine unstable or vibrating; bolts still in place at rear.

Part: Rear transit bolts

Unlevel or unstable installation

How to Identify: Machine rocks or moves on floor; noise varies with spin speed; adjusting feet reduces vibration.

Part: Machine feet and frame

Worn or damaged bearings or drum support

How to Identify: Rattling/grinding intensifies with spin speed; rough feel when manually turning drum; may produce grinding. (

Part: Drum bearings / tub bearings

Loose internal components (belt, pulley)

How to Identify: Noise appears during motor operation; inspection reveals slack or worn belt.

Part: Drive belt, pulleys

DIY Solutions

Remove foreign objects from drum or filter

Moderate 15-45 minutes
Tools Needed: Flashlight, Screwdriver (if accessing pump filter)
  1. Unplug appliance and open door.
  2. Inspect drum interior for coins, pins or debris and remove any objects.
  3. Access and clean pump/filter area per model manual to remove trapped debris.
  4. Run a short cycle empty to confirm noise reduced.
⚠️ Safety First: Always disconnect power before accessing internal areas.

Check and remove transit bolts

Easy 10-15 minutes
Tools Needed: Wrench or socket set
  1. Unplug the machine.
  2. Locate rear transit bolts and remove them according to manual instructions.
  3. Store bolts for future transport.
  4. Re-level machine and test operation.
⚠️ Safety First: Follow model manual for correct bolt locations.

Level the washer dryer

Easy 10-20 minutes
Tools Needed: Level tool
  1. Place level on machine top to check alignment.
  2. Adjust feet independently until machine sits flat and stable.
  3. Ensure all feet touch the floor firmly.
  4. Test machine to confirm reduced noise.
⚠️ Safety First: Be cautious moving heavy appliance.

Next step

Choose the next step for rattling sound

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drum Bearing Kit

Supports the spinning drum and ensures smooth, quiet rotation during cycles.

Typical part-only price
$40 - $95
DIY difficulty
Hard
Estimated time
120-180 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drive Belt

Transfers rotational power from the motor to turn the drum or tub.

$15 - $35 · Easy · 20-30 mins

Check fit & price
Model number required

Model-compatible Washer Dryer parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dryer Vent Cleaning Kit

Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.

View maintenance supply
Maintenance supply

Lint Trap Cleaning Brush

A narrow brush for routine cleaning around an accessible lint screen and housing.

View maintenance supply
Maintenance supply

Dryer Vent Hose Kit

A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace drum bearings or tub support

Estimated Cost: $150 - $400

Replace drive belt or pulley components

Estimated Cost: $50 - $150

When to Call a Professional

Rattling noise persists after removing foreign objects and leveling.
Noise indicates metal-on-metal grinding or increased vibration at high spin speeds.
Signs of bearing wear (drum play or rough manual rotation).

Preventive Maintenance

  • Clean pump filter and drum interior: Foreign object noise and blockages.
    Frequency: monthly
  • Check and re-level appliance: Vibration and rattling due to floor settling.
    Frequency: annually

Frequently Asked Questions

Why is my Hotpoint Washer Dryer rattling sound?
Common causes include foreign objects in the drum, unremoved transit bolts, or an unlevel installation.
How do I fix Hotpoint Washer Dryer rattling sound myself?
You can remove foreign objects, check for transit bolts, or level the machine to resolve the issue.
How much does it cost to fix rattling sound?
Professional repairs for drum bearings or drive components range from $50 to $400.
When should I call a technician for rattling sound?
If the noise persists after DIY fixes or if you suspect worn components, it's time to call a professional.

References & Sources

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Common Issues Reported by Users

  • Loose or damaged drum bearings
  • Foreign objects caught in the drum or pump
  • Worn or broken counterweights

User Suggested Solutions

  1. Inspect and replace drum bearings. To do this, unplug the washer dryer, remove the front panel, and check the bearings for wear. If they are damaged, replace them with new ones. Ensure to lubricate them properly during installation.

  2. Check for foreign objects. Open the drum and remove any items that may have fallen inside. Also, inspect the pump filter for debris. Clean it thoroughly to ensure proper drainage and operation.

  3. Replace the counterweights. This involves removing the front panel, disconnecting the springs, and replacing the counterweights. Note that special tools may be required to safely remove the weights. Ensure the new weights are securely fastened.

Limited-source guidance; percentages and success-rate claims are not shown
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. How difficult/possible a repair is this? Hotpoint Washer Dry...

Community Discussions

rattling sound and beeping

Replacement of the counter weight and PCB is possible, but removal of the counter weight may require special tools due to the use of springs.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!

Call Local Repair Provider +1 (888) 217-6318