Hotpoint Washer Dryer Error F13
⚡ Quick Answer: The Hotpoint washer dryer F13 error indicates a heating fault during the drying cycle, often resulting in the dryer not starting or stopping abruptly.... ✅ DIY Fixable
What Does Error F13 Mean?
The Hotpoint washer dryer F13 error indicates a heating fault during the drying cycle, often resulting in the dryer not starting or stopping abruptly. This can be accompanied by unusual noises. Common causes include a faulty temperature sensor, a malfunctioning heating element, or wiring issues within the dryer. Addressing these problems promptly ensures your appliance operates efficiently.
Common Symptoms:
- Dryer function does not start or stops quickly when drying begins
- F13 displayed during drying cycle
- Drying cycle fails while washing may still complete
Possible Causes
- Faulty dryer temperature sensor (thermistor) (medium)
- Open‑circuit or failed heating element / heater assembly fault (medium)
- Wiring fault in dryer heating / sensor circuit (medium)
How to Fix Error F13
DIY Fix Basic checks and reset
- Turn off and unplug the washer‑dryer
- Wait a few minutes and plug back in to see if the code clears
- Ensure the dryer load is not overloaded before retrying a dry cycle
Technician Only Inspect and replace dryer temperature sensor and heating components
- Disconnect power and access the dryer heater assembly
- Test the temperature sensor (thermistor) for continuity with a multimeter
- Inspect the heating element and associated wiring for breaks or damage
- Replace the faulty sensor or heater assembly if needed and reassemble
Parts needed: Temperature sensor (thermistor), Dryer heating element, Wiring harness/connectors
- If the error persists after basic reset and load checks
- If the user is uncomfortable accessing internal components
- If wiring or heater components appear damaged
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Heating Element
Heats the water or air inside the appliance to the required temperature.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 100W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | Hotpoint C00293535 |
| voltage_rating | 230V AC |
Common Questions
What does F13 error mean on Hotpoint washer dryer?
F13 indicates a heating fault during the drying cycle, preventing the dryer from starting or completing its cycle.
Can I fix Hotpoint washer dryer F13 error myself?
Yes, you can try basic checks like resetting the appliance and ensuring it's not overloaded before drying again.
How much does it cost to fix F13 error?
Repair costs for the F13 error are medium, covering parts and labor for sensor or heating element replacement.
When should I call a technician for F13?
Call a technician if the error persists after a reset, if you're uncomfortable with repairs, or if you notice visible damage.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!