Hotpoint Washer Dryer Error F01
⚡ Quick Answer: The Hotpoint washer dryer F01 error indicates a control board failure, often linked to a short in the motor triac or a fault in the electronic circuit... ✅ DIY Fixable
What Does Error F01 Mean?
The Hotpoint washer dryer F01 error indicates a control board failure, often linked to a short in the motor triac or a fault in the electronic circuit board. This may cause the machine to be unresponsive, with functions not selectable or the error appearing immediately upon power-up.
Common Symptoms:
- Washer dryer will not start or respond
- Functions not selectable
- Error appears immediately on power-up
Possible Causes
- Motor triac short on the main control board (medium)
- Electronic circuit board (PCB) fault or related component failure (medium)
- Loose or damaged wiring/connector between motor and control board (medium)
How to Fix Error F01
DIY Fix Reset the washer dryer
- Disconnect the appliance from the mains power supply.
- Leave unplugged for at least 2–3 minutes.
- Reconnect power and wait ~30 seconds before trying to start again.
Technician Only Inspect and repair control board and motor circuitry
- Unplug the washer dryer and access the internal control board and motor area.
- Inspect wiring harnesses and connectors for signs of damage, corrosion or burning.
- Test motor triac and other control board components with appropriate tools.
- Replace the main control board or faulty components as indicated by tests.
Parts needed: Main control board (PCB), Motor triac component, Wiring harness/connectors
- Error reappears after reset
- Visible burning or damage on components
- Machine is under warranty
Next step
Choose the next step for F01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F01 error mean on Hotpoint washer dryer?
F01 indicates a control board failure, causing the machine to not start or respond.
Can I fix Hotpoint washer dryer F01 error myself?
Yes, you can reset the appliance by unplugging it for 2-3 minutes and then reconnecting it.
How much does it cost to fix F01 error?
Repair costs range from £150 to £350, depending on the model and region.
When should I call a technician for F01?
Call a technician if the error reappears after a reset, or if you see visible damage to components.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!