Frigidaire Washing Machine: not functioning

Professional Repair Guide

What is this symptom?

Is your Frigidaire washing machine not functioning? If pressing the START button results in no drum movement or cycle initiation, it may indicate issues with the door switch, control board, or motor components. Power might be present, but the washer remains idle. Troubleshooting these issues can help you get your washer back in action.

Urgency: Medium

Important Tips for Frigidaire Models

If START is not pressed within ~10 minutes after selections, the washer will automatically turn off; ensure settings are completed properly. turn0(Frigidaire
Lid must be fully closed for the washer to start; partial closure can prevent operation. turn0(Frigidaire

Possible Causes

Door/Lid switch not engaged or faulty

How to Identify: Lid not fully closed, clicking not heard, or washer behaves as if door open when attempting start.

Part: Door/Lid Switch Assembly

Control board or electronic failure

How to Identify: No startup, no indicators, and basic checks (power, lid, fuses are normal; display may be blank or unresponsive.

Part: Main Control Board/Electronics

Motor start components (capacitor or motor) failure

How to Identify: Click or hum without drum rotation; multimeter indicates defective capacitor or motor winding issues.

Part: Motor Start Capacitor/Motor

DIY Solutions

Ensure lid/door fully closed and restart

Easy 2 minutes

Open and firmly close the washer lid/door until it latches.
Re-select desired wash cycle and press START within 10 minutes.
Ensure Delay Start is not set or cancel it before starting.

⚠️ Safety First: Do not force the lid closed if it feels stuck; power off first.

Check and replace accessible fuses

Moderate 15â€“30 minutes

Tools Needed: Multimeter, Screwdriver

Unplug the washer from power.
Access the fuse panel per model manual.
Use a multimeter to test continuity of the line fuse and thermal fuse.
Replace any blown fuses with exact part matches.
Reassemble and test start.

⚠️ Safety First: Ensure power is disconnected before accessing internal parts.

Professional Repairs

Replace Main Control Board

Estimated Cost: $150 - $350

Motor or Motor Start Component Repair

Estimated Cost: $200 - $500

When to Call a Professional

No response after trying DIY fuse checks and lid switch engagement

Control panel is unresponsive or has error codes indicating internal failure

Uncomfortable handling internal electrical components

Preventive Maintenance

Clean and check door/lid latch: Start failures due to poor lid engagement
Frequency: monthly
Check for blown fuses during annual service: Unexpected shutdowns due to old or stressed fuses
Frequency: annually

Frequently Asked Questions

Why is my Frigidaire Washing Machine not functioning?

Common causes include a faulty door switch, control board failure, or motor issues.

How do I fix Frigidaire Washing Machine not functioning myself?

Ensure the door is closed, check fuses, and retest to start the machine.

How much does it cost to fix not functioning?

Professional repairs range from $150 to $500, depending on the issue.

When should I call a technician for not functioning?

If basic troubleshooting fails or if you're uncomfortable with repairs, consider calling a technician.

References & Sources

What should I do if my washer does not start? - Frigidaire Official

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

50%

DIY Success Rate Difficulty: Either

User Suggested Solutions

Stack a new washer on the existing dryer, although they won't clip together securely.

Success rate: 50.0%

Analysis based on 2 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

Community Discussions

needs replacing

You can stack a new washer on the existing dryer, but they won't clip together securely.