Frigidaire Washing Machine: mold growth
What is this symptom?
If you're noticing mold or mildew inside your Frigidaire washing machine, you're likely dealing with moisture accumulation. This can manifest as visible black spots on laundry, musty odors, or mold around the drum, gasket, and detergent dispenser. Regular cleaning and maintenance can help prevent this issue from recurring.
Possible Causes
Moisture and humidity accumulation inside washer
How to Identify: Musty smell; visible mold around the door seal or inside drum folds; moist interior after use
Part: Drum and door seal/gasket
Next step
Choose the next step for mold growth
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Gasket
Creates a watertight seal around the door to prevent leaks during operation.
- Typical part-only price
- $45 - $110
- DIY difficulty
- Medium
- Estimated time
- 30-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Preventive Maintenance
-
Run Tub Clean cycle regularly: Mold growth and odors
Frequency: monthly or every ~50 loads -
Leave door open after use: Trapped moisture accumulation
Frequency: After every wash -
Wipe down gasket/seal: Residue buildup that feeds mold growth
Frequency: Weekly to biweekly
Frequently Asked Questions
Why is my Frigidaire Washing Machine mold growth?
How do I fix Frigidaire Washing Machine mold growth myself?
How much does it cost to fix mold growth?
When should I call a technician for mold growth?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Moisture accumulation in the rubber door seal due to improper drying after use
- Use of low-efficiency detergents that do not rinse cleanly, leading to residue buildup
- Infrequent cleaning of the washing machine, allowing mold spores to thrive
User Suggested Solutions
-
Clean the rubber door seal with a mixture of vinegar and water. Wipe thoroughly and dry the area after each use to prevent moisture buildup.
-
Run a hot water cycle with a washing machine cleaner or a cup of bleach to eliminate mold and mildew. Ensure to follow with a rinse cycle.
-
Replace the rubber door seal (bellow) if it is heavily soiled or damaged. This may require special tools and should be done carefully.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
moldy rubber ring around the door
The grey rubber ring (bellow) can be replaced, but it requires special tools and may be challenging to do it yourself.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!