Bosch Washing Machine: drum is loose

Professional Repair Guide

What is this symptom?

If your Bosch washing machine drum feels loose and wobbly, and produces banging or rattling noises during operation, it indicates potential instability. This issue can stem from worn suspension springs or shock absorbers, loose drum bearings, or loose drum bolts. Addressing this promptly is crucial to prevent further damage.

Urgency: Medium

Possible Causes

Worn suspension springs or shock absorbers

How to Identify: Excessive vibration during spin, drum moves more than usual when pushed, audible banging or knocking noise.

Part: Suspension springs / shock absorbers

Loose or worn drum bearings

How to Identify: Grinding noise when spinning drum by hand, drum has too much play and may have water leakage or grease around edges.

Part: Drum bearings

Loose drum bolts or counterweights

How to Identify: Visible loose bolts upon inspection; machine vibrates violently, imbalance persists after level adjustment.

Part: Drum mounting bolts / counterweights

Preventive Maintenance

Regularly check machine leveling and load distribution: Unbalanced loads that stress suspension and bearings
Frequency: monthly
Inspect suspension components annually: Wear-related drum instability
Frequency: annually

Frequently Asked Questions

Why is my Bosch Washing Machine drum is loose?

Common causes include worn suspension springs, shock absorbers, or loose drum bearings.

How do I fix Bosch Washing Machine drum is loose myself?

No DIY solutions are recommended for this issue.

How much does it cost to fix drum is loose?

Cost varies based on the issue; consult a technician for an accurate estimate.

When should I call a technician for drum is loose?

Call a technician if the drum shows excessive movement or makes noise during operation.

References & Sources

Bosch Washing Machine Drum Loose Support Official
Loose washing machine drum â€“ Domestic & General Blog Community

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

60%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Worn or damaged suspension springs
Faulty shock absorbers
Loose or damaged drum bearings

User Suggested Solutions

Inspect and replace worn suspension springs. Disconnect the machine from power, remove the front panel, and check the springs for wear. Replace if necessary.
Check and replace faulty shock absorbers. After removing the front panel, locate the shock absorbers and test for resistance. Replace if they are leaking or not functioning.
Inspect and replace drum bearings. This requires removing the drum assembly, which can be complex. Check for play in the drum and replace if necessary.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

Bosch Washing Machine Broken Intransit

Community Discussions

drum is loose and banging

Most likely the struts under the basket became separated; they can be reassembled or replaced.