Bosch Washing Machine Error E01
⚡ Quick Answer: The Bosch washing machine error E01 indicates a problem with the door lock mechanism, preventing the washer from starting. This error often appears wh... ✅ DIY Fixable
What Does Error E01 Mean?
The Bosch washing machine error E01 indicates a problem with the door lock mechanism, preventing the washer from starting. This error often appears when the machine detects that the door is not properly locked, leading to symptoms like a flashing door symbol and unusual clicking sounds. Common causes include a door latch that isn't fully engaging, a faulty door lock mechanism, or obstructions in the door seal. To resolve this, check and clean the door closure and perform a power reset before considering a professional repair.
Common Symptoms:
- Washer will not start
- Door symbol flashing when attempting to begin a cycle
- Error appears immediately after selecting a program
Possible Causes
- Door latch not fully engaging (medium)
- Faulty door lock mechanism (lock switch or solenoid) (medium)
- Obstruction or dirt in door seal preventing proper closure (medium)
How to Fix Error E01
DIY Fix Check and clean door closure
- Ensure the washing machine door is fully closed and no laundry is caught in the seal.
- Inspect the door seal area for lint, dirt, or debris and clean with a damp cloth.
- Open and firmly close the door, listening for a solid latch engagement sound.
- Retry starting a wash cycle.
DIY Fix Perform power reset
- Turn off the washing machine and unplug it from power.
- Wait 1–2 minutes.
- Plug the machine back in and attempt to start a cycle again.
Technician Only Inspect/replace door lock assembly
- Disconnect power to the machine.
- Remove the washer’s front access panel to reach the door lock assembly.
- Test the door lock switch and solenoid for continuity with a multimeter.
- Replace defective components if necessary and reassemble.
- Verify proper door locking and error resolution.
Parts needed: Door lock assembly, Door latch switch or solenoid
- If after cleaning and checking the door it still won’t latch or the error persists
- If the latch mechanism appears physically damaged
- If the machine displays additional error codes
Next step
Choose the next step for E01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 0-5 ohms |
| part_number | 00615525 |
| voltage_rating | 120V AC |
Common Questions
What does E01 error mean on Bosch washing machine?
E01 error indicates a malfunction in the door lock mechanism, preventing the washer from starting.
Can I fix Bosch washing machine E01 error myself?
Yes, you can check and clean the door closure, ensure proper latching, and perform a power reset.
How much does it cost to fix E01 error?
Repair costs range from $50 to $150 for parts, depending on the model, with additional labor costs.
When should I call a technician for E01?
Call a technician if the error persists after cleaning, if the latch is damaged, or if additional error codes appear.
Sources & References
- Cracking the E01 Code: Bosch Washer Care Tips (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!