Bosch Washing Machine Error E11
⚡ Quick Answer: The Bosch washing machine E11 error code indicates a water filling issue, typically caused by the water inlet valve malfunctioning or an insufficient ... ✅ DIY Fixable
What Does Error E11 Mean?
The Bosch washing machine E11 error code indicates a water filling issue, typically caused by the water inlet valve malfunctioning or an insufficient water supply. The machine detects that water is not reaching the required level within the expected timeframe, leading to a halt in the washing cycle. Symptoms include the error appearing shortly after the cycle starts, the washer stopping its filling process, and the 'Spin' indicator flashing. Common causes include blocked water supply, clogged hoses, or a faulty water inlet valve.
Common Symptoms:
- Error appears shortly after cycle start when water does not reach required level
- Washer stops filling and shows E11
- ‘Spin’ indicator may flash alongside error
- No water entering drum
Possible Causes
- Water supply is off, blocked, or has insufficient pressure (medium)
- Clogged or kinked inlet hose or inlet filter (medium)
- Faulty water inlet valve (medium)
- Pressure switch / water level sensor fault or blocked pressure hose (medium)
How to Fix Error E11
DIY Fix Basic Water Supply and Hose Checks
- Turn off and unplug the washing machine.
- Ensure the water tap supplying the machine is fully open.
- Inspect the inlet hose for kinks, twists, or visible blockages.
- Detach the inlet hose and check the filter screen at the connection for debris; clean if needed.
- Reconnect hose securely and test a short cycle to see if error clears.
Technician Only Inspect and Replace Faulty Components
- Test the water inlet valve for proper operation using a multimeter; replace if defective.
- Check the pressure switch and pressure hose for blockages or damage; clear or replace as needed.
- Verify water pressure at inlet; ensure it meets manufacturer specifications.
- Examine wiring and connectors between the inlet valve, pressure switch, and control board for continuity.
Parts needed: Water inlet valve, Pressure switch / water level sensor, Inlet hose and filter
- If error persists after basic checks (hoses, filters, water supply)
- If internal components (valve, pressure switch) test faulty
- If water pressure is adequate yet filling still fails
Next step
Choose the next step for E11
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 20W |
|---|---|
| component | Water Inlet Valve |
| resistance | 3-5 ohms |
| part_number | Bosch 00652525 |
| voltage_rating | 120V AC |
Common Questions
What does E11 error mean on Bosch washing machine?
E11 indicates a water filling issue, often due to a malfunctioning water inlet valve or insufficient water supply.
Can I fix Bosch washing machine E11 error myself?
Yes, you can check the water supply, inspect the inlet hose for blockages, and ensure the water tap is fully open.
How much does it cost to fix E11 error?
Repair costs range from $50 to $200 for parts, with additional technician labor costs.
When should I call a technician for E11?
Call a technician if the error persists after basic checks or if internal components test faulty.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!