Bosch Washing Machine Error E02
⚡ Quick Answer: The Bosch washing machine E02 error code indicates a drainage issue or a motor fault that prevents the drum from rotating. Symptoms include the drum n... ✅ DIY Fixable
What Does Error E02 Mean?
The Bosch washing machine E02 error code indicates a drainage issue or a motor fault that prevents the drum from rotating. Symptoms include the drum not spinning, the washer stopping prematurely, and the error being displayed shortly after starting the cycle. Common causes include a failure in the motor or drive system and blockages affecting drainage. Addressing these issues promptly can help restore normal operation.
Common Symptoms:
- Drum does not rotate after start
- Washer stops early in wash cycle
- Error displayed immediately or after a short run
Possible Causes
- Motor / drive system failure (including worn brushes or tacho sensor) (medium)
- Drainage or blockage issue affecting cycle progress (medium)
How to Fix Error E02
DIY Fix Basic checks and reset
- Turn off washer and disconnect power for several minutes to reset control logic
- Check drain hose is free from kinks and not blocked
- Open and clean drain pump filter at the base of the washer
- Attempt a test cycle once simple blockages are cleared
Technician Only Detailed diagnostics and component inspection
- Inspect motor assembly underside the machine for worn carbon brushes and replace if needed
- Check tacho/Hall sensor and motor windings with appropriate tools
- Verify drain pump operation and replace if faulty
- Inspect wiring harness for motor and pump circuits
Parts needed: Motor brushes, Tacho/Hall effect sensor, Drain pump, Wiring harness
- If drum still will not spin after basic drainage and reset checks
- If motor or sensor components are suspected faulty
- If unusual noise, sparks, or burning smells are present
Next step
Choose the next step for E02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 20-40 ohms |
| part_number | Bosch 00167782 |
| voltage_rating | 120V AC |
Common Questions
What does E02 error mean on Bosch washing machine?
E02 indicates a drainage issue or motor fault preventing the drum from rotating.
Can I fix Bosch washing machine E02 error myself?
Yes, you can perform basic checks like resetting the machine and cleaning the drain pump filter.
How much does it cost to fix E02 error?
Repair costs typically range from $100 to $350+, depending on parts and labor.
When should I call a technician for E02?
Call a technician if the drum won't spin after checks or if you suspect motor or sensor faults.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!