Bosch Washing Machine: clicking noise

Professional Repair Guide

What is this symptom?

Experiencing a clicking noise from your Bosch washing machine? This rhythmic sound during drum rotation or draining often indicates foreign objects trapped in the drum or an unbalanced load. Addressing these issues can restore your washer's smooth operation and prevent further damage.

Urgency: Medium

Important Tips for Bosch Models

  • Bosch official troubleshooting lists unbalanced load and installation issues as common noise causes and advises checking load distribution and machine leveling.

Possible Causes

Foreign objects trapped in drum or drain pump

How to Identify: Clicking changes with drum movement; visible objects between inner drum and outer tub or inside pump filter

Part: Drum interior or drain pump/filter

Unbalanced load

How to Identify: Noise during spin with heavy items clumped on one side, machine shaking or vibrating

Part: Drum load distribution

DIY Solutions

Remove foreign objects from drum and pump filter

Moderate 15-30 minutes
Tools Needed: screwdriver, flashlight, pliers
  1. Unplug washer and turn off water supply.
  2. Open drum and manually inspect for visible objects; remove if present.
  3. Locate and open drain pump filter (typically bottom front panel) and clear any debris.
  4. Test run to confirm noise reduction.
⚠️ Safety First: Ensure power is disconnected before accessing internal panels.

Rebalance laundry load

Easy 5 minutes
  1. Pause the wash cycle.
  2. Redistribute clothes evenly in drum mixing heavy and light items.
  3. Remove some items if overfilled.
  4. Restart machine.
⚠️ Safety First: Pause machine safely according to manual instructions.

Level washing machine

Moderate 10-20 minutes
Tools Needed: spirit level, wrench
  1. Adjust feet to ensure machine is level on floor.
  2. Tighten lock nuts after leveling.
  3. Check stability by gently rocking machine.
⚠️ Safety First: Ensure machine is stable to avoid movement during cycles.

Professional Repairs

Replace drum bearings

Estimated Cost: $150 - $400

Replace drive belt or pulley

Estimated Cost: $80 - $200

Inspect and replace suspension components

Estimated Cost: $100 - $300

When to Call a Professional

Clicking persists after removing foreign objects and balancing load
Noise is accompanied by grinding, wobbling, or vibration at high spin speeds
Visible wear or damage to internal components is suspected

Preventive Maintenance

  • Check pockets before laundry: Foreign objects entering drum and pump
    Frequency: every load
  • Clean drain pump filter: Debris buildup causing clicking sounds
    Frequency: monthly
  • Ensure washer is level: Unbalanced load noise and vibration
    Frequency: periodically

Frequently Asked Questions

Why is my Bosch Washing Machine making a clicking noise?
The clicking noise may be due to foreign objects trapped in the drum or drain pump, or an unbalanced laundry load.
How do I fix Bosch Washing Machine clicking noise myself?
To fix it, check for and remove foreign objects from the drum and pump filter. Also, redistribute your laundry load for balance.
How much does it cost to fix clicking noise in Bosch washing machine?
Professional repairs can cost between $80 to $400, depending on whether components like drum bearings or drive belts need replacing.
When should I call a technician for clicking noise?
If DIY solutions do not resolve the clicking noise, or if the issue persists, it's advisable to call a technician for a thorough inspection.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Foreign object trapped in the drum or pump
  • Worn or damaged drum bearings
  • Loose motor coupler or drive belt

User Suggested Solutions

  1. Inspect the drum and pump for foreign objects. Disconnect the washing machine from power, remove the front panel, and check for items like coins or small clothing pieces. Clear any obstructions found.

  2. Check and replace worn drum bearings. This involves removing the drum assembly, inspecting the bearings, and replacing them if they show signs of wear. Reassemble the machine afterward.

  3. Inspect the motor coupler and drive belt for looseness or damage. Tighten or replace as necessary. This usually requires accessing the back panel of the machine.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. New to front loader

Community Discussions

clicking noise when rotating drum

Check for something loose between the drums or in the motor/stator.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!