Beko Refrigerator: banging noise

Professional Repair Guide

What is this symptom?

If your Beko refrigerator is emitting a loud banging or knocking noise, it may disrupt your kitchen's tranquility. This noise often occurs during compressor cycling or fan operation and can be caused by improper installation, internal component contact, or items shifting within the fridge. Understanding the source can help you address the issue effectively and restore your appliance's quiet operation.

Urgency: Medium

Important Tips for Beko Models

Official Beko guidance notes that normal operation includes various sounds and only disturbing noise warrants service contact.

Possible Causes

Compressor cycling impact/normal operation

How to Identify: Occurs during compressor start/stop cycles or temperature changes, not always indicating failure; banging coincides with compressor operation.

Part: Compressor and refrigerant cycle

Improper installation or vibration amplification

How to Identify: Uneven floor or insufficient vibration isolation causes banging or knocking amplified against wall or floor.

Part: Cabinet and mounting/feet

Internal component contact (fan or loose part)

How to Identify: Noise stops when door opened; banging linked with fan or ice contact with fan blades.

Part: Evaporator fan / internal parts

Loose item inside fridge causing impacts

How to Identify: Knocking sound that corresponds to shifting of jars or bottles; often reduced by rearranging contents.

Part: Stored items / shelves

Major component wear/failure (fan motor or compressor internal part)

How to Identify: Persistent loud banging not related to operation cycles or environment; accompanied by performance issues like poor cooling.

Part: Fan motor or compressor internals

DIY Solutions

Level and isolate refrigerator

Easy 15-30 minutes

Tools Needed: bubble level

Ensure fridge is on a flat, stable surface.
Adjust front feet or levelers so the fridge stands level.
Consider adding vibration-absorbing mat under fridge base to reduce noise transmission.

⚠️ Safety First: Unplug appliance before adjusting to prevent accidental movement.

Rearrange internal contents

Easy 5-10 minutes

Remove and reorganize items inside refrigerator so bottles and jars donâ€™t touch each other.
Ensure airflow pathways inside are clear and items are secured.
Observe if banging noise decreases during operation.

Defrost if fan contact suspected

Moderate 2-4 hours (passive)

Tools Needed: towels

Turn off and unplug refrigerator.
Open doors and allow natural thaw to melt any internal frost.
Wipe up water and allow interior to dry before plugging back in.

⚠️ Safety First: Do not use heat sources like hair dryers inside appliance; risk of damage.

Professional Repairs

Replace or repair evaporator fan motor

Estimated Cost: $50 - $150 (parts & labor)

Compressor inspection and service

Estimated Cost: $200 - $600

When to Call a Professional

Noise persists after DIY steps

Noise is loud, continuous, and accompanied by cooling performance degradation

Signs of mechanical failure (burning smell, excessive vibration)

Preventive Maintenance

Keep fridge level and vibration damped: Noise from vibration or resonance
Frequency: monthly
Clean rear condenser area: Compressor overwork and excessive noise
Frequency: every 6 months

Frequently Asked Questions

Why is my Beko Refrigerator banging noise?

Common causes include compressor cycling, improper installation, and loose items inside.

How do I fix Beko Refrigerator banging noise myself?

Ensure the fridge is level, rearrange internal items, or defrost if fan contact is suspected.

How much does it cost to fix banging noise?

Professional repairs range from $50 to $600 depending on the component needing service.

When should I call a technician for banging noise?

If DIY solutions don't resolve the issue or if there's potential major component failure, call a technician.

References & Sources

Beko fridge noise guidance Official
General fridge noise causes Community
Fridge noise troubleshooting overview Community

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Loose compressor mounting or brackets
Faulty compressor or internal components
Vibration from uneven surface or improper installation

User Suggested Solutions

Check and tighten the compressor mounting bolts. Ensure the refrigerator is level and adjust the feet if necessary.
Inspect the compressor for any signs of damage or wear. If faulty, replace the compressor or its components.
Place rubber pads or shims under the refrigerator to absorb vibrations and stabilize it.