Beko Refrigerator: not heating

Professional Repair Guide

What is this symptom?

Is your Beko refrigerator not heating properly? If the interior feels warm or is insufficiently chilled despite running, it may not be reaching the desired cold temperatures. This issue can stem from incorrect temperature settings or airflow blockages, leading to an inefficient cooling system.

Urgency: High

Important Tips for Beko Models

  • Some Beko models may take time to cool after door left open or restocking; allow several hours before diagnosing issue

Possible Causes

Incorrect temperature settings

How to Identify: Check digital or dial temperature setting; if set too warm or on energy‑saving mode, interior may stay above target temperature

Part: Control thermostat/temperature settings

DIY Solutions

Adjust Temperature Settings

Easy 2–5 minutes
  1. Locate temperature control panel/dial
  2. Set fridge to recommended cool setting
  3. Wait several hours to see if temperature drops

Ensure Airflow Isn’t Blocked

Easy 10–15 minutes
  1. Remove items blocking internal vents
  2. Rearrange items to allow cold air circulation
  3. Avoid overfilling compartments

Check Installation Space and Ambient Temperature

Easy 5–10 minutes
  1. Ensure fridge has recommended clearance around sides/back
  2. Avoid placing near heat sources or in unheated areas
  3. Confirm room ambient temperature is within recommended range

Clean Condenser Coils

Moderate 20–30 minutes
Tools Needed: Brush, vacuum cleaner
  1. Unplug fridge
  2. Locate back/bottom condenser coils
  3. Gently vacuum and brush away dust and debris
⚠️ Safety First: Unplug appliance before cleaning coils

Professional Repairs

Compressor or Refrigerant System Repair/Replacement

Estimated Cost: $200–$600+

Thermostat or Control Board Replacement

Estimated Cost: $100–$300

When to Call a Professional

Fridge and freezer both not cooling
Unusual noises from compressor
Leaks or refrigeration fluid odor
Fridge fails to cool after DIY checks

Preventive Maintenance

  • Clean condenser coils: Reduced cooling efficiency due to dust buildup
    Frequency: annually
  • Check door seals: Cold air leakage
    Frequency: monthly
  • Ensure proper ventilation space: Overheating and poor cooling
    Frequency: periodically

Frequently Asked Questions

Why is my Beko Refrigerator not heating?
Common causes include incorrect temperature settings and blocked airflow.
How do I fix Beko Refrigerator not heating myself?
Adjust temperature settings, ensure airflow isn't blocked, and clean condenser coils.
How much does it cost to fix not heating?
Professional repairs range from $100 to $600+, depending on the issue.
When should I call a technician for not heating?
Call a technician if DIY solutions fail or if the problem is complex.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Faulty drain heater cable
  • Defective thermostat
  • Blocked drain line

User Suggested Solutions

  1. Inspect and replace the drain heater cable. Disconnect the refrigerator from power, locate the drain heater cable, and replace it with a new one. Ensure all connections are secure before restoring power.

  2. Test and replace the thermostat if defective. Use a multimeter to check the thermostat for continuity. If it fails the test, replace it with a compatible model.

  3. Clear any blockages in the drain line. Remove any debris or ice that may be obstructing the drain line, ensuring proper water flow.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. DIY Drain heater?

Community Discussions

drain heater needs replacing

Using a drain heater cable to replace the original.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!