Amana Washing Machine: not spinning during wash cycle
What is this symptom?
Is your Amana washing machine not spinning during the wash cycle? This can lead to wet clothes and may indicate issues such as a malfunctioning lid switch, motor failure, or drainage problems. Understanding these common causes can help you determine the next steps for resolution.
Possible Causes
Lid/lid switch or door lock not engaging
How to Identify: Lid doesn’t click shut securely, washer refuses to enter spin; continuity test on switch shows open circuit.
Part: Lid switch / door lock assembly
Motor coupling or motor failure
How to Identify: Motor hums but fails to spin; coupling plastic piece broken.
Part: Motor coupling / drive motor
Drainage problem hindering spin
How to Identify: Water stays in tub at end of wash, spin doesn’t start; visible clogs or pump loud operation.
Part: Drain pump/hose
Next step
Choose the next step for not spinning during wash cycle
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drive Motor
Drives the drum, agitator, or pump to rotate during cycles.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 45-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Washer Motor Coupling
Transfers motor power to the washer transmission on models that use a direct-drive coupling.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Preventive Maintenance
-
Clean and check drain pump/hose: Drainage blockages affecting spin cycle
Frequency: every 3 months -
Avoid overloading: Unbalanced loads halting spin cycles
Frequency: Every wash
Frequently Asked Questions
Why is my Amana Washing Machine not spinning during wash cycle?
How do I fix Amana Washing Machine not spinning during wash cycle myself?
How much does it cost to fix not spinning during wash cycle?
When should I call a technician for not spinning during wash cycle?
References & Sources
- Why Your Washer Won’t Spin - Amana Official
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Unbalanced load preventing the spin cycle from engaging
- Faulty lid switch that fails to detect when the lid is closed
- Worn or damaged drive belt that affects the spin function
User Suggested Solutions
-
Redistribute the load evenly in the drum. Remove some items if the load is too heavy or uneven, and try running the cycle again.
-
Inspect and test the lid switch for continuity using a multimeter. Replace it if it is faulty.
-
Check the drive belt for wear or damage. If it is worn, replace it by removing the front panel and accessing the motor.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
does NOT spin within normal wash cycle, DOES spin in 'Drain/Spin'
Check cold and hot filter screens for sediment.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!