Amana Washing Machine: not draining
What is this symptom?
If your Amana washing machine is filling and running the wash cycle but water is left in the drum, it likely means it's not draining properly. This common issue may occur without displaying error codes, leading to frustration and potential delays in laundry chores. Understanding the causes and solutions can help restore your washer's functionality.
Important Tips for Amana Models
- Some Amana models have accessible coin traps/drain filters behind lower front panel which should be checked early.
Possible Causes
Clogged drain hose
How to Identify: Water remains after cycle; drain hose kinked or debris visible; water drains slowly or not at all.
Part: Drain hose
Blocked drain pump filter/coin trap
How to Identify: Water remains in drum; accessible filter behind front panel has debris like lint, coins.
Part: Drain pump filter/coin trap
Faulty drain pump
How to Identify: Pump makes unusual noises, humming with no drain action, or no sound when expected.
Part: Drain pump
Control board or timer not signaling pump
How to Identify: No pump activation and normal diagnostics indicate electrical issue; may need multimeter testing.
Part: Control board/Timer
DIY Solutions
Inspect and clear the drain hose
- Unplug washer and pull away from wall
- Disconnect drain hose and check for kinks or debris
- Flush hose with water or use a flexible brush/snaking tool to clear clogs
- Reattach hose and run short drain cycle to test.
Clean drain pump filter/coin trap
- Unplug washer and locate access panel at base front
- Open panel and slowly remove drain filter to catch residual water
- Remove debris from filter and wash clean
- Reinstall filter and panel, test washer drain.
Next step
Choose the next step for not draining
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace faulty drain pump
Replace lid/door switch assembly
Control board or timer replacement
When to Call a Professional
Preventive Maintenance
-
Clean drain pump filter/coin trap: Clogs that lead to drainage issues
Frequency: every 3 months -
Inspect drain hose for kinks or debris: Blockages and restricted flow
Frequency: every 3 months
Frequently Asked Questions
Why is my Amana Washing Machine not draining?
How do I fix Amana Washing Machine not draining myself?
How much does it cost to fix not draining?
When should I call a technician for not draining?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Drain pump failure (3 mentions)
- Main control board issue (1 mentions)
User Suggested Solutions
-
Replace drain pump
-
Check main control board
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
won't drain properly
Possible main control issue or drain pump replacement needed.
not draining
The loose wire was reconnected to the wiring harness, and the user is hopeful it will hold up.
washer won't work in basement due to high drain pipes
Amana washer can work with high drain pipes if an extender hose is used, but front-load models are recommended for better drainage.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!